On Sep 19, 2011, at 4:35 PM, Joe Catania wrote:
The device is open to atmosphere- therefore its at atmospheric
pressure. The steam is being created upon water contacting hot metal.
That is an assumption, not a measurement.
When the valve is opened it looks to me the device is under
significant pressure. That is an assumption on my part, but based on
observation and experience.
It should not be under that much pressure. The other end should be
open to the atmosphere via the hose. Steam should be flying out the
hole around the thermometer if that much pressure is present.
It would obviously be useful to continuously measure the flow and
pressure of the supply water (since we know for sure that is
variable), and, for safety sake, the pressure just inside the relief
valve.
----- Original Message ----- From: "Horace Heffner"
<hheff...@mtaonline.net>
To: <vortex-l@eskimo.com>
Sent: Monday, September 19, 2011 8:29 PM
Subject: Re: [Vo]:Calulations for 1 MW plant.
On Sep 19, 2011, at 2:26 PM, Joe Catania wrote:
Why do you think the device is under pressure?
See end of:
http://www.nyteknik.se/nyheter/energi_miljo/energi/article3264362.ece
Best regards,
Horace Heffner
http://www.mtaonline.net/~hheffner/
Best regards,
Horace Heffner
http://www.mtaonline.net/~hheffner/
