In the report they reported Noise: 50 dBA, which is below normal room
loudness.
How could they measure this, when the generator was running all time?
Am 29.10.2011 13:01, schrieb Larry Ectsnte:
Is there any reason why there was a 500kW generator running AND hooked
up to the E-Cat through the WHOLE test, despite the E-Cat being
switched into "self-sustain" mode? I gave it a tiny percent chance of
being possible before, but now there's nothing but a clear scam left
of it.
"Power for start-up (resistive coils that provided heat to the
reaction chambers) was provided by the large and loud genset (was
making all the noise) you see that is nearly as large as the small
shipping container in which the 1 MW E-Cat plant was arranged. Once
the reaction chambers got up to temperature, they were maintained by
the heat produced by the reaction. I'm not sure why they kept the
generator running after that, but I would guess it was for back-up or
safety. I'm sure the engineers testing the system made sure what the
power levels were at all times."
"Probably the biggest opening for skeptics will be the continually
running genset that is probably rated for 500 kW (my guess), and
appears to have been connected by cables to the E-Cat."
Source: http://pesn.com/2011/10/28/9501940_1_MW_E-Cat_Test_Successful/
Anyone have an explanation? Thanks. Also, my first post here.
-Larry
