Am 31.10.2011 15:47, schrieb Jed Rothwell:
Peter Heckert wrote:
When Lewan looked over the fence to the heat dissipators then he
should have feeled A LOT of hot air. He did not mention anything.
I asked him about that. He said he did not have a chance to reach over
the barrier and check. I believe others have said it was hot.
As I mentioned, the pumps could not have made the outlet pipe valve
handle palpably warm. Assuming there was no input power to the
reactor, as claimed, this is proof of anomalous heat. However we have
no independent verification that the power going to the reactor was
turned off. It is not easy to tell with such large equipment.
As I said before the test, it is much easier to confirm a kilowatt
level reaction.
Possibly not.
Some m^3 of hot air per second are impossible to fake. Somebody who has
technical experince with air condition systems or large machines should
be able to estimate this.
But of course, we have also seen in the video that Rossi has a lot of
equipment and very large water containers.
He could easily do a steam sparging test with a single ecat module if he
wanted this.
But he doesnt want it.
Very strange that he made all these efforts at October 6 with an
additional heat exchanger.
If he had done a steam sparging test with these large containers he had
needed almost no time to do this. Why does he waste his time? He always
says he has no time to waste.
Peter