I have made a video of the field scopings shown below where all three phases can be drawn from inductively by placing spiralled secondaries over 3 poles of the 666 machine's three phases. These 3 secondaries voltages are added to combine their voltages in series, which on a three phase system would vector add to zero. What is not considered here is the option employed by reversing the secondaries wiring, which is employed between two 180 degree field actions found by scopings and shown on first video http://youtu.be/uakJJKGf-mM http://youtu.be/RBaOZTLgb3M shows Unity of Timings via 666 Machine; Proving that it IS a Time Distortion Machine. Now certain tests are being arranged where a incandescent light bulb powered by the alternator by the conventional three phase ferromagnetic voltage step up, where all three phases have full wave rectifiers attached to 4 fold voltage secondaries. With the three positive and three negative output terminals made common on each side, the incandescent bulb is then tested as a dc load. In counterpart then, the same voltages driving that three phase direct line process are first instead obtained inductively through the air from secondaries covering three of the field poles of each three phase process.(from the 666 machine) BUT THEY ARE NOT ESTABLISHED AS CONNECTION TO THE THREE PHASE 4/1 STEP UP TRANSFORMER, BUT INSTEAD THE SIGNALS ARE ALL COMBINED IN SERIES TO A SINGLE 4/1 STEP UP TRANSFORMER, AND THE BULB THEN TESTED AS AN AC OUTPUT. The first tests of this approach shows a marked decrease of seriesed secondary voltage, once the load of a 60 watt bulb was applied. Efforts at correction will take place in the next movement. HDN Pioneering the Applications of Interphasal Resonances http://tech.groups.yahoo.com/group/teslafy/
--- On Wed, 1/4/12, Harvey Norris <harv...@yahoo.com> wrote: > From: Harvey Norris <harv...@yahoo.com> > Subject: [Vo]:Time Distortion Work > To: vortex-l@eskimo.com > Cc: tesl...@yahoogroups.com > Date: Wednesday, January 4, 2012, 11:55 PM > > http://www.flickr.com/photos/harvich/6638542345/ > Separation in time between magnetic fields above and below > a stack of three > pancake spirals of the balanced 666 machine. The color > codings of checkers show > the series routing of coil segments for each phase before > folding into a circle > as a torsional field device, and then further given the > appropriate equal > capacities to resonate under that condition of mutual > inductance between > phasings. The simplest mathematical two dimensional magic > square of nine > elements will contain three diagonal progressions in three > dimensions;(obtained > by folding both sides of the 2d formation in 3d space to > reveal the continuing > diagonal progression) likewise here three twisting > diagonals circling around > each other in 3d space will enable the unique formation > that will enable > balanced currents on all three phases: which will never > develope in other > formations of coil placements, including the first solution > of lateral > placements. Likewise the MIDDLE segment of each series > phase has a reversed polarity connection; whereby this > practice enables the > central segment to REPEL the magnetic fields created by the > outer segments for > 5/6ths of the cycle time period, forcing those magnetic > fields to be issued > outwards from the assembly for use in efficient > primary/secondary relationships. > Likewise the first 2d magic square as an analogy shows that > the opposite > progressions of numbers towards the center are mirror > images of each other; > showing point symmetry. The net result of these actions > will show a torsional > time "compression" between the opposing poles of the 666 > machine, having 6 polar > compressions at one sixth of a cycle at 60 degrees of > compressional action in > time > http://www.flickr.com/photos/harvich/6638773467/ > Magic Square Technology applied for seriesed coil segments > yielding balanced > currents to create torsional fields on three phase and time > distortion effects > on perimeters. Three diagonal progressions of phases > wrapping around each other > in 3d model produces torsional time effects on perimeters > of poles. > http://www.flickr.com/photos/harvich/6638873427/ > Moving former top scope sensor left to top of left coil > stack, showing near 180 > phasing > http://www.flickr.com/photos/harvich/6638910985/ > By reversing or revolving 180 degrees the new top sensor > placed to the left of > the first measured stack; we see that the bottom magnetic > field of the first > stack with phase 3 on top, is almost identical in time with > the magnetic field > emitted by the stack with phase 1 on top. This then shows a > near synchrony of > magnetic fields between stack 3 phase on bottom and stack 1 > phase on top, both > of which are in front view. Not only this but we also > showed both polarities of > that observation by reversing the second sensor. Originally > we showed that the > magnetic field from phase 3 stack on both top and bottom > were also FAIRLY close, > perhaps 60 degrees difference at most. Next then we show > the TIME difference > between BOTH the TOP magnetic fields of phase stack three > and phase stack one by > attaching the extra sensor formerly shown sitting on top of > the scope. > http://www.flickr.com/photos/harvich/6639042041/ > Relative magnetic field separations for two front top > magnetic fields. > http://www.flickr.com/photos/harvich/6639096085/ > Giving one sensor a higher amplitude and moving around the > circle to verify 120 > phase degree separation on the top magnetic field side > Pioneering the Applications of Interphasal Resonances > http://tech.groups.yahoo.com/group/teslafy/ > >
