If all you want is simple WEP for the 2611, you should be able to add
the following to your interface setup in /etc/network/interfaces.
wireless-key s:1234567890123 (or whatever 13 character ASCII key matches
the other end. If you use the hex format, remove the "s:")
This assumes a 128 bit key.
Edwin
Jan Hetges wrote:
Hi all
i have a wrap-board running voyage-0.4.1 (linux-2.6.20-486-voyage)
with two senao 2511mp-plus, prism2.5 based.
one in adhoc mode for local meshing, and one in managed mode on
a 30Km link to the "Upstream-WISP".
I didn't have too much trouble connencting to that in normal managed
mode (with hostap driver). But he likes hidden ssid and wep encryption...
so i tried with hostap and with/without wpasupplicant (hostap and wext).
as the hostap documentation suggests client mode might be better
supported with other drivers, i tried hermes/orinoco, as well
with/without wpasupplicant... but no luck yet.
any experiences with linux-wlan-ng for that? ...i'll try that next.
any suggestions, help, hints greatly apreciated.
thanks
--Jan
------------------------------------------------------------------------
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
<=+=+=+==+=+=+==+=+=+=+=+=+=+=+=>
Edwin Whitelaw, P.E.
New River Valley Unwired, LLC
2200 Lonesome Dove Dr
Christiansburg, VA 24073
540-239-0318
_______________________________________________
Voyage-linux mailing list
[email protected]
http://list.voyage.hk/mailman/listinfo/voyage-linux
