On Wed, Nov 28, 2007 at 06:19:18PM -0500, Edwin Whitelaw wrote: >> i have a wrap-board running voyage-0.4.1 (linux-2.6.20-486-voyage) >> with two senao 2511mp-plus, prism2.5 based. >> one in adhoc mode for local meshing, and one in managed mode on >> a 30Km link to the "Upstream-WISP". >> I didn't have too much trouble connencting to that in normal managed >> mode (with hostap driver). But he likes hidden ssid and wep encryption... >> so i tried with hostap and with/without wpasupplicant (hostap and wext). >> as the hostap documentation suggests client mode might be better >> supported with other drivers, i tried hermes/orinoco, as well >> with/without wpasupplicant... but no luck yet. >> any experiences with linux-wlan-ng for that? ...i'll try that next. >> any suggestions, help, hints greatly apreciated. > > If all you want is simple WEP for the 2611, you should be able to add the > following to your interface setup in /etc/network/interfaces. yes, it *should*... ;-) > > wireless-key s:1234567890123 (or whatever 13 character ASCII key matches > the other end. If you use the hex format, remove the "s:") the key is 10 characters (and looks like hex), so i assume 40/64 bit hex but no luck yet it might be more a problem of the hidden essid.
thanks --Jan
signature.asc
Description: Digital signature
_______________________________________________ Voyage-linux mailing list [email protected] http://list.voyage.hk/mailman/listinfo/voyage-linux
