Hi Sean,
Thanks. That's cool.
- Punky
Sean wrote:
I just posted complete instructions for ndiswrapper.
http://wiki.voyage.hk/dokuwiki/doku.php?id=ndiswrapper
Sean
varadarajan narayanan wrote:
Hi !
This is not norhtech box but from the same manufacturer . Via Eden
800 mhz fanless
cheers
Rad
On Tue, Oct 14, 2008 at 2:00 AM, Sean <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
Varadarajan,
Do you have a NorhTec box? If so you should really use ndiswrapper
and the windows driver. The VIA driver is so bad! Associating to
access points when you don't want it to, requiring patches to
wpasupplicant, etc.
Check out this page for instructions:
http://nicolas314.wordpress.com/norhtec-microclient-jr/
The driver is here:
http://www.norhtec.com/info/download/vt6655softwarepackage1.1.zip
Punky has conveniently compiled ndiswrapper for the
ndiswrapper-modules-2.6.23-486-voyage. (THANKS PUNKY!) Just make
sure that this line is in your /etc/apt/sources.list.
deb http://www.voyage.hk/dists/0.5 ./
Sean
varadarajan narayanan wrote:
set -e; for d in driver ; do make -C $d install ; done
make[1]: Entering directory `/boot/vt6655_v118_02/driver'
make -C /lib/modules/2.6.23-486-voyage/build
SUBDIRS=/boot/vt6655_v118_02/driver
modules
make[2]: Entering directory
`/usr/src/linux-source-2.6.23-voyage'
WARNING: Symbol version dump
/usr/src/linux-source-2.6.23-voyage/Module.symver
s
is missing; modules will have no dependencies and
modversions.
Building modules, stage 2.
MODPOST 1 modules
/bin/sh: scripts/mod/modpost: No such file or directory
make[3]: *** [__modpost] Error 127
make[2]: *** [modules] Error 2
make[2]: Leaving directory `/usr/src/linux-source-2.6.23-voyage'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/boot/vt6655_v118_02/driver'
make: *** [install] Error 2
voyage:
On Tue, Oct 14, 2008 at 1:05 AM, varadarajan narayanan
<[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
<mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>>> wrote:
Hi !
I am getting the following errors when compiling the
drivers for
this Mini PCI card from VIA with Voyage 0.5.2.
<http://0.5.2.> <http://0.5.2.>
- symvers is missing - modules will have no dependencies or
modversions
then it go to building modules stage 2
MODPOST 1 modules
/bin/sh : scripts/mod/modpost: No such file or directory
and then Errror 127 then quits.
what is this modpost ? what am I missing ?
I tried compiling this in another pure debian etch it goes
fine ?
Please help !
Cheers
Rad
------------------------------------------------------------------------
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk <mailto:Voyage-linux@list.voyage.hk>
http://list.voyage.hk/mailman/listinfo/voyage-linux
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
--
Regards,
Punky
Voyage Solutions (http://solution.voyage.hk)
* Embedded Solutions and Systems
- Mesh Networking, Captive Portal, IP Surveillance, VoIP/PBX
- Network Engineering, Development Platform and Consultation
_______________________________________________
Voyage-linux mailing list
Voyage-linux@list.voyage.hk
http://list.voyage.hk/mailman/listinfo/voyage-linux
