On Thu, Aug 16, 2012 at 5:59 PM, Jim Cromie <jim.cro...@gmail.com> wrote: > please keep voyage ccd, > someone else may have important input. > > > On Tue, Aug 14, 2012 at 11:43 PM, Simon Hafner <reactorm...@gmail.com> wrote: >> 2012/8/14 Jim Cromie <jim.cro...@gmail.com>: >>> On Mon, Jul 23, 2012 at 2:54 AM, liquid <liqui...@gmail.com> wrote: >>>> Hello, >>>> >>>> I am trying to install voyage linux 0.8.5 on an Alix 3d2 board via pxe >>>> boot. >>>> I can see that it loads the image properly, but the boot process hangs on >>>> "Switching to clocksource tsc". I've seen that voyage uses newer kernel >>>> version, which i suspect to be the problem. I have been able to install and >>>> boot debian stable on 2.6.32 kernel on this board, but i need the newer >>>> kernel's support for MP-6x10 driver. I have already tried adding "nomfgpt" >>>> kernel parameter and setting "clocksource=" to various values. The card's
could you try clocksource=pit and clocksource=tsc on daily build ? I tried forcing tsc on my 4801, and it seemed to boot slower, but it didnt hang. Also, you have a running kernel (or you wouldnt have gotten the /proc/cpuinfo) can you modprobe scx200_hrt on it, see if it loads (iirc, it expects a particular PCIID, and your SOC may not match - or it might) if old kernel has it, try booting new one (via pxe) with clocksource=scx200_hrt what is an MP-6x10 board anyway ? >>>> bios version is 0.99h (newest), and it supports some kind of MFGPT >>>> workaround, which I have also been trying switching on. I have no idea what >>>> else i could try to boot the system, so i beg you for help :) _______________________________________________ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
