Kenwyn Smith <[EMAIL PROTECTED]> wrote:
> On or about 04-Oct-99 18:19:13, J. Klingele wrote the following :-
>
> >Does anybody know how i can save the tearoff settings for all windows?
>
> Go to the menu and open as many windows as you think you'll need, then
> set up your panels, positions and window sizes, snapshot each one,
Already done, position and size of the windows is ok. But these
settings are saved in mui/Voyager.prefs
> then
> use the mui tearoff prefs and change the vertical slider from 0 to a
> larger number, I used 10 and I'm not sure if this step was really
> necessary,
I think i know what you mean, but imho this is only an example for a
slidergadget. Anyway, tried with no effect.
> (but it worked) save mui prefs then don't forget to copy the
> new voyager.tearoff pref file from ENV: to disk. This should now be a
> larger file than the original, mine grew from 134 to 468 bytes.
Sorry, not here. the tearoff.pref is still 134 bytes large [or better
small 8-)]. And it will only be saved if i close Voyager. And only
then.
The 'save settings' menu-item saves only the voyager.prefs and
vflash.data to Progdir.
The mui settings program saves only mui/voyager.prefs to env: and
envarc:
And yes, all windows are still open while i close V.
I tried some other mui-settings, window save mode from the window page
and others. But all without succes.
Any other ideas?
bye
--
Juergen Klingele
____________________________________________________________
Voyager Mailing List - Info & Archive: http://www.vapor.com/
For Listserver Help: <[EMAIL PROTECTED]>, "HELP"
To Unsubscribe: <[EMAIL PROTECTED]>, "UNSUBSCRIBE"
