Hi Thorsten, we're using a lot of VPN's to Junipers, 6,2/3 ... I would suggest that you first disable Xauth on both sides and get it going. When this 'basic' connect works, then you can deal with Xauth. There a serveral ways what a Juniper can do with that logon information btw. we use a Radius server, so it's easy to go into the wrong path ...
Gruß Christian > -----Ursprüngliche Nachricht----- > Von: [email protected] [mailto:vpn-help- > [email protected]] Im Auftrag von kevin vpn > Gesendet: Samstag, 05. März 2011 05:11 > An: [email protected] > Betreff: Re: [vpn-help] Problems using shrew to connect to ns5gt > > On Sun, 27 Feb 2011 15:50:11 +0100 > "Thorsten Steffen" <[email protected]> wrote: > > > Hi guys, > > > > I'm trying to connect to Juniper NS5GT (Hardware Version: 1010, > > Firmware Version:6.2.0r2.0 Firewall+VPN) with Shrew VPN Client 2.1.7 > > (running on Win7 64bit) without success. > > > > I used http://www.shrew.net/support/wiki/HowtoJuniperSsg to configure > > both sides. > > > ... > > > > I think "xauth login FAILED. gw <vpnclient_gateway>, username > > <thorsten>, retry: 0, timeout: 1" is the relevant message. > > > > > > Hi Thorsten, > > You're right that the Juniper logs suggest that the problem is at the > XAuth authentication step. > > I'd double-check the steps you performed when configuring the user on > the SSG device (section "Create Local User Accounts" in the HowTo). > Most especially, check the password you entered. > _______________________________________________ > vpn-help mailing list > [email protected] > http://lists.shrew.net/mailman/listinfo/vpn-help _______________________________________________ vpn-help mailing list [email protected] http://lists.shrew.net/mailman/listinfo/vpn-help
