Hello Jim, Thanks for your reaction, but it does not help me.
When loading, only one instruction gives an error: C:\Program Files\ShrewSoft\VPN Client\devcfg.exe –add net vnet c:\Program Files\ShrewSoft\VPN Client\drivers\virtualnet.inf The error is: “InstallSelectedDriver failed, error code=0x00000006”. Any other suggestion? Thank you. Jacques Van den broeck Engineering and Information technologies Logo-ToB-120329-Small Thinking Outside the Box av. des Campanules 44 B1170 Brussels - Belgium Tel.: Mobile: +32 (0)2 660 65 75 +32 (0)475 251 786 Some things to try... -----Original Message----- From: Jim Harle Sent: Friday, November 1, 2013 9:58 AM To: 'Michael Jeschak' Cc: <mailto:[email protected]> [email protected] Subject: RE: [vpn-help] Shrewsoft VPN v.2.2.2 don't work with Windows 8.1 64bit Mike, I wish I could remember the exact steps I took to get things working after my 8.1 upgrade. I also don't remember the specific symptom I experienced when trying to connect to the remote gateway - it may have been a negotiation timeout, but it also could have been an error related to the virtual adapter. In any case, here are the steps I would take, if the problem happened to me again, and a simple uninstall/reboot/reinstall of the Shrew client didn't work: - uninstall Shrew client - remove any leftover traces of Shrew (program files / programdata / registry) - remove any hidden non-present networking devices from device manager - check that no Shrew filter drivers exist on the physical network interfaces; if so, remove them - perform a 'netsh int tcp reset' and 'netsh winsock reset' from an administrative command prompt to "reset" the networking - reboot and confirm all networking is functional - install Shrew client "fresh" - hope for the best! HTH, Jim --- --Original Message----- From: <mailto:[email protected]> [email protected] [ <mailto:[email protected]> mailto:[email protected]] On Behalf Of Michael Jeschak Sent: Friday, November 01, 2013 5:06 AM To: <mailto:[email protected]> [email protected] Subject: Re: [vpn-help] Shrewsoft VPN v.2.2.2 don't work with Windows 8.1 64bit Hallo, is their anyone who could help me furthermore. After Upgrading from W8Pro to W8.1Pro ShrewSoft get "negotiation timeout occurs" Error. At destination no call to identify ... Any suggestion? Thanxs Mike -------- Original-Nachricht -------- Betreff: Re: [vpn-help] Shrewsoft VPN v.2.2.2 don't work with Windows 8.1 64bit (was:Shrewsoft VPN client and Windows 8 problem) Datum: Tue, 29 Oct 2013 18:45:02 +0100 Hi Jim, the Device is available. Removing the Device, including the .inf result in an file missing error by deinstalling shrew-soft. Rebooting and reinstalling doesn't solve. Deinstalling, removing all "Shrew" in Registry, rebooting, reinstalling Shrew-Soft doesn't solve. The problem "negotiation timeout occurs" remains ... Any suggestion? Thanxs Mike Am 28.10.2013 22:49, schrieb Jim Harle: > Mike – FWIW, here is a post from earlier this month. > > On Oct 28, 2013 2:42 AM, "Michael Jeschak" < <mailto:[email protected]> [email protected]> wrote: Dear Sirs, I'm using several connections to different gateways. Since XP it works fine, also at last with W8-64. But since upgrading to 8.1 64 bit no connection works. The access-manager starts as usuall, connections regarsless if with XAUTH or not, but always with PSK, don't work. After "Bringing up tunnel ..." a timeout occurs negotiation timeout occurs tunnel diabled detached from key daemon Some of the target gateways are reachable over ISDN. There I can see, that no communication is receiving from the VPN-Client. My Internetconnection is done over a Wireless Intel 135 and a bintec rs232bw gateway. If I use an other machine running W7-64 all works fine, as it would be before upgrading my machine to Windows 8.1. Is there a solution available? With best regards Mike
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
