Hi, On Mon, Jun 2, 2014 at 3:57 PM, Thinking Outside the Box <[email protected]> wrote:
> Hello Jim, > > Thanks for your reaction, but it does not help me. > > When loading, only one instruction gives an error: > > C:\Program Files\ShrewSoft\VPN Client\devcfg.exe –add net vnet c:\Program > Files\ShrewSoft\VPN Client\drivers\virtualnet.inf > > The error is: > > “InstallSelectedDriver failed, error code=0x00000006”. > > > > Any other suggestion? Thank you. > Do you have look ? https://lists.shrew.net/mailman/htdig/vpn-help/2011-July/013332.html > > > > > *Jacques Van den broeck* > *Engineering and Information technologies* > > [image: Logo-ToB-120329-Small] > > Thinking Outside the Box > av. des Campanules 44 > B1170 Brussels - Belgium > > > Tel.: > > Mobile: > > > +32 (0)2 660 65 75 > > +32 (0)475 251 786 > > > > > > > > Some things to try... > > > > -----Original Message----- > > From: Jim Harle > > Sent: Friday, November 1, 2013 9:58 AM > > To: 'Michael Jeschak' > > Cc: [email protected] > > Subject: RE: [vpn-help] Shrewsoft VPN v.2.2.2 don't work with Windows 8.1 > 64bit > > > > Mike, I wish I could remember the exact steps I took to get things working > after my 8.1 upgrade. I also don't remember the specific symptom I > experienced when trying to connect to the remote gateway - it may have been > a negotiation timeout, but it also could have been an error related to the > virtual adapter. > > > > In any case, here are the steps I would take, if the problem happened to > me again, and a simple uninstall/reboot/reinstall of the Shrew client > didn't work: > > > > - uninstall Shrew client > > - remove any leftover traces of Shrew (program files / programdata / > registry) > > - remove any hidden non-present networking devices from device manager > > - check that no Shrew filter drivers exist on the physical network > interfaces; if so, remove them > > - perform a 'netsh int tcp reset' and 'netsh winsock reset' from an > administrative command prompt to "reset" the networking > > - reboot and confirm all networking is functional > > - install Shrew client "fresh" > > - hope for the best! > > > > HTH, > > > > Jim > > > > --- > > --Original Message----- > > From: [email protected] [ > mailto:[email protected] <[email protected]>] > On Behalf Of Michael Jeschak > > Sent: Friday, November 01, 2013 5:06 AM > > To: [email protected] > > Subject: Re: [vpn-help] Shrewsoft VPN v.2.2.2 don't work with Windows 8.1 > 64bit > > > > > > Hallo, > > > > is their anyone who could help me furthermore. After Upgrading from W8Pro > to W8.1Pro ShrewSoft get "negotiation timeout occurs" Error. At destination > no call to identify ... > > > > Any suggestion? > > > > Thanxs > > > > Mike > > > > > > -------- Original-Nachricht -------- > > Betreff: Re: [vpn-help] Shrewsoft VPN v.2.2.2 don't work with Windows > > 8.1 64bit (was:Shrewsoft VPN client and Windows 8 problem) > > Datum: Tue, 29 Oct 2013 18:45:02 +0100 > > > > > > Hi Jim, > > > > the Device is available. Removing the Device, including the .inf result in > an file missing error by deinstalling shrew-soft. Rebooting and > reinstalling doesn't solve. > > > > Deinstalling, removing all "Shrew" in Registry, rebooting, reinstalling > Shrew-Soft doesn't solve. > > > > The problem "negotiation timeout occurs" remains ... > > > > Any suggestion? > > > > Thanxs > > > > Mike > > > > > > > > Am 28.10.2013 22:49, schrieb Jim Harle: > > > Mike – FWIW, here is a post from earlier this month. > > > > > > > > On Oct 28, 2013 2:42 AM, "Michael Jeschak" <[email protected]> wrote: > > > > > > Dear Sirs, > > > > I'm using several connections to different gateways. Since XP it works > > fine, also at last with W8-64. But since upgrading to 8.1 64 bit no > > connection works. > > > > The access-manager starts as usuall, connections regarsless if with > > XAUTH or not, but always with PSK, don't work. > > > > After "Bringing up tunnel ..." a timeout occurs > > negotiation timeout occurs > > tunnel diabled > > detached from key daemon > > > > Some of the target gateways are reachable over ISDN. There I can see, > > that no communication is receiving from the VPN-Client. > > > > My Internetconnection is done over a Wireless Intel 135 and a bintec > > rs232bw gateway. If I use an other machine running W7-64 all works > fine, > > as it would be before upgrading my machine to Windows 8.1. > > > > Is there a solution available? > > > > With best regards > > > > Mike > > > > > > > > _______________________________________________ > vpn-help mailing list > [email protected] > https://lists.shrew.net/mailman/listinfo/vpn-help > >
_______________________________________________ vpn-help mailing list [email protected] https://lists.shrew.net/mailman/listinfo/vpn-help
