Here it is.
Thanks,
Mircea
vpp#
vpp# show pci
Address Sock VID:PID Link Speed Driver Product Name
Vital Product Data
0000:09:00.0 0 15b3:1007 8.0 GT/s x8 mlx4_core
0000:0b:00.0 0 8086:1584 8.0 GT/s x8 i40e XL710 40GbE
Controller RV: 0x 86
0000:0b:00.1 0 8086:1584 8.0 GT/s x8 i40e XL710 40GbE
Controller RV: 0x 86
0000:0b:00.2 0 8086:1584 8.0 GT/s x8 i40e XL710 40GbE
Controller RV: 0x 86
0000:0b:00.3 0 8086:1584 8.0 GT/s x8 i40e XL710 40GbE
Controller RV: 0x 86
0000:0b:02.0 0 8086:154c unknown vfio-pci
0000:0b:02.1 0 8086:154c unknown vfio-pci
0000:0b:02.2 0 8086:154c unknown vfio-pci
0000:0b:02.3 0 8086:154c unknown vfio-pci
0000:0b:02.4 0 8086:154c unknown vfio-pci
0000:0b:06.0 0 8086:154c unknown vfio-pci
0000:0b:06.1 0 8086:154c unknown vfio-pci
0000:0b:06.2 0 8086:154c unknown vfio-pci
0000:0b:06.3 0 8086:154c unknown vfio-pci
0000:0b:06.4 0 8086:154c unknown vfio-pci
vpp#
vpp#
From: Damjan Marion (damarion) [mailto:damar...@cisco.com]
Sent: Monday, May 08, 2017 10:18 AM
To: Mircea Orban <mior...@hotmail.com>
Cc: vpp-dev@lists.fd.io
Subject: Re: [vpp-dev] issues with running VPP on a Fortville NIC
On 5 May 2017, at 22:37, Mircea Orban
<mior...@hotmail.com<mailto:mior...@hotmail.com>> wrote:
I have a Fortville NIC (XL710-QDA1) with one QSFP+ port that supports two
modes: 1X40g and 4X10g.
While in 1X40g mode everything seems to be fine, when I run VPP in 4X10g mode
some issues seems to occur:
- When I use PFs it’s all good except that the link speed is not
detected properly (VPP thinks these are 40G links)
- Additionally, with VFs, VPP seems to be confused with the VF Id
numbering scheme (I think). Only one of the whitelisted VFs it’s picked up (out
of 6 configured), and when I try to bring it up VPP crashes (see attached log).
Please let me know if it can get fixed.
I think problem here is very simple, nobody added support for 4x10G mode :)
Can you send output of “show pci” ?
_______________________________________________
vpp-dev mailing list
vpp-dev@lists.fd.io
https://lists.fd.io/mailman/listinfo/vpp-dev
