HI Sergio,
As I mentioned that transport mode is working now.
Next I tried tunnel mode.
Here I can see successfully packet decryption. But later inner packet gets
dropped.
Outer IPSec packet is like 172.28.128.4 -> 172.28.128.5
Inner packet is 1.1.1.1 -> 2.2.2.2
I have added 2.2.2.2 on same interface as is Outer IPSec end-point
vpp# show int address
GigabitEthernet0/8/0 (up):
172.28.128.5/24
2.2.2.2/24
local0 (dn):
vpp# q
Above I have configured as below:
set int ip address GigabitEthernet0/8/0 172.28.128.5/24
set int ip address GigabitEthernet0/8/0 2.2.2.2/24
set interface state GigabitEthernet0/8/0 up
Trace looks like:
00:39:17:383051: dpdk-input
GigabitEthernet0/8/0 rx queue 0
buffer 0x4a5b: current data 14, length 152, free-list 0, clone-count 0,
totlen-nifb 0, trace 0x0
PKT MBUF: port 0, nb_segs 1, pkt_len 166
buf_len 2176, data_len 166, ol_flags 0x0, data_off 128, phys_addr 0x9cf29700
packet_type 0x0
IP4: 08:00:27:f5:2b:b9 -> 08:00:27:a9:8e:d4
IPSEC_ESP: 172.28.128.4 -> 172.28.128.5
tos 0x00, ttl 64, length 152, checksum 0xf9d5
fragment id 0xe81b, flags DONT_FRAGMENT
00:39:17:383093: ip4-input
IPSEC_ESP: 172.28.128.4 -> 172.28.128.5
tos 0x00, ttl 64, length 152, checksum 0xf9d5
fragment id 0xe81b, flags DONT_FRAGMENT
00:39:17:383099: ipsec-input-ip4
esp: sa_id 20 spi 1000 seq 7
00:39:17:383101: dpdk-esp-decrypt
esp: crypto aes-cbc-128 integrity sha1-96
00:39:17:383105: dpdk-crypto-input
dpdk_crypto: cryptodev-id 1 queue-pair 0 next-index 2 status 1 sa-idx 1
00:39:17:383115: dpdk-esp-decrypt-post
00:39:17:383116: ip4-input
ICMP: 1.1.1.1 -> 2.2.2.2
tos 0x00, ttl 64, length 84, checksum 0x17a6
fragment id 0x1cfe, flags DONT_FRAGMENT
ICMP echo_request checksum 0x80dc
00:39:17:383117: ipsec-input-ip4
esp: no esp packet
00:39:17:383117: ip4-lookup
fib 0 dpo-idx 7 flow hash: 0x00000000
ICMP: 1.1.1.1 -> 2.2.2.2
tos 0x00, ttl 64, length 84, checksum 0x17a6
fragment id 0x1cfe, flags DONT_FRAGMENT
ICMP echo_request checksum 0x80dc
00:39:17:383122: ip4-local
ICMP: 1.1.1.1 -> 2.2.2.2
tos 0x00, ttl 64, length 84, checksum 0x17a6
fragment id 0x1cfe, flags DONT_FRAGMENT
ICMP echo_request checksum 0x80dc
00:39:17:383123: error-drop
ip4-input: ip4 source lookup miss
Do I have to configure Inner IP in some other way to avoid “ip4 source lookup
miss”.
Thanks
Mukesh
_______________________________________________
vpp-dev mailing list
[email protected]
https://lists.fd.io/mailman/listinfo/vpp-dev
