The equivalent of VLAN on a switch in VPP is a bridge domain or BD for short. One can put interfaces or VLAN sub-interfaces in a BD to form a L2 network among all interfaces in it. One can also create a loopback interface, put it in a BD as its BVI (Bridge Virtual Interface) and assign IP addresses to it. Then packet can be IP forwarded into a BD through its BVI.
Following is the VPP CLI sequence to create a loopback (resulting in interface name loop0), put it in BD 13 as a BVI, and put an IP address on it: loopback create mac 1a:2b:3c:4d:5e:6f set interface l2 bridge loop0 13 bvi set interface state loop0 up set interface ip address loop0 6.0.0.250/16 Regards, John From: [email protected] <[email protected]> On Behalf Of saint_sun ? via Lists.Fd.Io Sent: Friday, October 12, 2018 3:52 AM To: [email protected] Cc: [email protected] Subject: [vpp-dev]vlan interface support? I have a question: Does vpp has the function like the configuration example: interface f0/1 switchport access vlan 10 Interface vlan 10 ip address 10.0.0.1 255.255.255.0 If vpp has the function, where can I find the command and the source code? Another question, does vpp support superVLAN? anyone who knows please tell me, appreciate for your reply very much!
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#10808): https://lists.fd.io/g/vpp-dev/message/10808 Mute This Topic: https://lists.fd.io/mt/27268189/21656 Group Owner: [email protected] Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
