Hi Guys, We are working on moving VPPSB Netlink to VPP main repo: https://gerrit.fd.io/r/#/c/15062/ Port VPPSB's rtnetlink & router plugin to VPP main
This patch is under review and consolidating, but it could work well and you can use it. Thanks, Hongjun From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of alp.ars...@xflowresearch.com Sent: Friday, November 2, 2018 6:43 PM To: 'Kevin Yan' <kevin....@mavenir.com>; vpp-dev@lists.fd.io Subject: Re: [E] [vpp-dev] VPPSB Netlink build failing Using this command and running the application again, solved the issue, # rm -rf /dev/shm/* Thank you for the help. From: vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> [mailto:vpp-dev@lists.fd.io] On Behalf Of alp.ars...@xflowresearch.com<mailto:alp.ars...@xflowresearch.com> Sent: Friday, November 2, 2018 12:42 PM To: 'Kevin Yan'; vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> Subject: Re: [E] [vpp-dev] VPPSB Netlink build failing No luck. Getting a seg fault. Will try to build again with stable/1810 instead of the master. [root@vpp-build bin]# ./vpp -c startup.conf vlib_plugin_early_init:361: plugin path /vpp/build-root/install-vpp_debug-native/vpp/lib/vpp_plugins load_one_plugin:189: Loaded plugin: abf_plugin.so (ACL based Forwarding) load_one_plugin:189: Loaded plugin: acl_plugin.so (Access Control Lists) load_one_plugin:189: Loaded plugin: avf_plugin.so (Intel Adaptive Virtual Function (AVF) Device Plugin) load_one_plugin:191: Loaded plugin: cdp_plugin.so load_one_plugin:189: Loaded plugin: dpdk_plugin.so (Data Plane Development Kit (DPDK)) load_one_plugin:189: Loaded plugin: flowprobe_plugin.so (Flow per Packet) load_one_plugin:189: Loaded plugin: gbp_plugin.so (Group Based Policy) load_one_plugin:189: Loaded plugin: gtpu_plugin.so (GTPv1-U) load_one_plugin:189: Loaded plugin: igmp_plugin.so (IGMP messaging) load_one_plugin:189: Loaded plugin: ila_plugin.so (Identifier-locator addressing for IPv6) load_one_plugin:189: Loaded plugin: ioam_plugin.so (Inbound OAM) load_one_plugin:117: Plugin disabled (default): ixge_plugin.so load_one_plugin:189: Loaded plugin: l2e_plugin.so (L2 Emulation) load_one_plugin:189: Loaded plugin: lacp_plugin.so (Link Aggregation Control Protocol) load_one_plugin:189: Loaded plugin: lb_plugin.so (Load Balancer) load_one_plugin:189: Loaded plugin: mactime_plugin.so (Time-based MAC source-address filter) load_one_plugin:189: Loaded plugin: map_plugin.so (Mapping of address and port (MAP)) load_one_plugin:189: Loaded plugin: memif_plugin.so (Packet Memory Interface (experimental)) load_one_plugin:189: Loaded plugin: nat_plugin.so (Network Address Translation) load_one_plugin:189: Loaded plugin: nsh_plugin.so (Network Service Header) load_one_plugin:189: Loaded plugin: nsim_plugin.so (network delay simulator plugin) load_one_plugin:189: Loaded plugin: perfmon_plugin.so (Performance monitor plugin) load_one_plugin:189: Loaded plugin: pppoe_plugin.so (PPPoE) load_one_plugin:189: Loaded plugin: router.so (router) load_one_plugin:189: Loaded plugin: srv6ad_plugin.so (Dynamic SRv6 proxy) load_one_plugin:189: Loaded plugin: srv6am_plugin.so (Masquerading SRv6 proxy) load_one_plugin:189: Loaded plugin: srv6as_plugin.so (Static SRv6 proxy) load_one_plugin:189: Loaded plugin: stn_plugin.so (VPP Steals the NIC for Container integration) load_one_plugin:189: Loaded plugin: svs_plugin.so (Source VRF Select) load_one_plugin:189: Loaded plugin: tlsopenssl_plugin.so (openssl based TLS Engine) load_one_plugin:117: Plugin disabled (default): unittest_plugin.so load_one_plugin:189: Loaded plugin: vmxnet3_plugin.so (VMWare Vmxnet3 Device Plugin) ./vpp[15923]: svm_map_region:766: region /global_vm mutex held by dead pid 15806, tag 2, force unlock ./vpp[15923]: svm_map_region:774: recovery: attempt to re-lock region Segmentation fault From: vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> [mailto:vpp-dev@lists.fd.io] On Behalf Of Kevin Yan Sent: Friday, November 2, 2018 12:28 PM To: alp.ars...@xflowresearch.com<mailto:alp.ars...@xflowresearch.com>; vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> Subject: Re: [E] [vpp-dev] VPPSB Netlink build failing I think rpm packages can be generated but I never tried that, just use "make run " or "vpp -c /etc/vpp/startup.conf" to start vpp, the additional thing you should do is just copy router.so to the default plugin location. From: alp.ars...@xflowresearch.com<mailto:alp.ars...@xflowresearch.com> [mailto:alp.ars...@xflowresearch.com] Sent: Friday, November 02, 2018 3:17 PM To: Kevin Yan <kevin....@mavenir.com<mailto:kevin....@mavenir.com>>; vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> Subject: RE: [E] [vpp-dev] VPPSB Netlink build failing Yes, did that and its compiling. Thanks. One question, after the build is completed, how do I install it to my system? I can see the install directory with all the binaries, but how do I get them to proper locations, like I would if I installed using the rpms. From: vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> [mailto:vpp-dev@lists.fd.io] On Behalf Of Kevin Yan Sent: Friday, November 2, 2018 12:16 PM To: alp.ars...@xflowresearch.com<mailto:alp.ars...@xflowresearch.com>; vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> Subject: Re: [E] [vpp-dev] VPPSB Netlink build failing And also remove else if (r->rtm.rtm_family == AF_MPLS) part From: Kevin Yan Sent: Friday, November 02, 2018 3:15 PM To: 'alp.ars...@xflowresearch.com' <alp.ars...@xflowresearch.com<mailto:alp.ars...@xflowresearch.com>>; vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> Subject: RE: [E] [vpp-dev] VPPSB Netlink build failing for(int i = 1; label != 0; i++) change to : int I; for(i = 1; label != 0; i++) From: alp.ars...@xflowresearch.com<mailto:alp.ars...@xflowresearch.com> [mailto:alp.ars...@xflowresearch.com] Sent: Friday, November 02, 2018 3:11 PM To: Kevin Yan <kevin....@mavenir.com<mailto:kevin....@mavenir.com>>; vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> Subject: RE: [E] [vpp-dev] VPPSB Netlink build failing Tried removing both macros (RTNLGRP_MPLS_ROUTE & RTA_VIA), failed with another MPLS related error in the router plugin. make[1]: Entering directory `/vpp/build-root/build-vpp_debug-native/router' CC router/tap_inject_netlink.lo /vpp/build-data/../router/router/tap_inject_netlink.c: In function 'get_mpls_label_stack': /vpp/build-data/../router/router/tap_inject_netlink.c:154:3: error: 'for' loop initial declarations are only allowed in C99 mode for(int i = 1; label != 0; i++) { ^ /vpp/build-data/../router/router/tap_inject_netlink.c:154:3: note: use option -std=c99 or -std=gnu99 to compile your code /vpp/build-data/../router/router/tap_inject_netlink.c: In function 'add_del_route': /vpp/build-data/../router/router/tap_inject_netlink.c:200:9: error: 'for' loop initial declarations are only allowed in C99 mode for(int i = 0; i < MPLS_STACK_DEPTH && stack[i] != 0; i++) { ^ /vpp/build-data/../router/router/tap_inject_netlink.c:228:33: error: 'AF_MPLS' undeclared (first use in this function) else if (r->rtm.rtm_family == AF_MPLS) ^ /vpp/build-data/../router/router/tap_inject_netlink.c:228:33: note: each undeclared identifier is reported only once for each function it appears in In file included from /vpp/build-root/install-vpp_debug-native/vpp/include/vppinfra/mem.h:55:0, from /vpp/build-root/install-vpp_debug-native/vpp/include/vppinfra/vec.h:42, from /vpp/build-root/install-vpp_debug-native/vpp/include/vppinfra/format.h:44, from /vpp/build-root/install-vpp_debug-native/vpp/include/vppinfra/elf.h:41, from /vpp/build-root/install-vpp_debug-native/vpp/include/vppinfra/elf_clib.h:41, from /vpp/build-root/install-vpp_debug-native/vpp/include/vlib/vlib.h:44, from /vpp/build-root/install-vpp_debug-native/netlink/include/librtnl/netns.h:19, from /vpp/build-data/../router/router/tap_inject_netlink.c:17: /vpp/build-data/../router/router/tap_inject_netlink.c:241:44: error: dereferencing pointer to incomplete type clib_memcpy (&rpath.frp_addr.ip4, via->rtvia_addr, sizeof (rpath.frp_addr.ip4)); ^ /vpp/build-root/install-vpp_debug-native/vpp/include/vppinfra/string.h:153:48: note: in definition of macro 'clib_memcpy' #define clib_memcpy(d,s,n) memcpy_s_inline(d,n,s,n) ^ make[1]: *** [router/tap_inject_netlink.lo] Error 1 make[1]: Leaving directory `/vpp/build-root/build-vpp_debug-native/router' make: *** [router-build] Error 2 It is compiling after I removed the whole else block, not sure how it will affect the plugin. One question, after the build is completed, how do I install it to my system? I can see the install directory with all the binaries, but how do I get them to proper locations, like I would if I installed using the rpms. From: vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> [mailto:vpp-dev@lists.fd.io] On Behalf Of Kevin Yan Sent: Friday, November 2, 2018 11:38 AM To: alp.ars...@xflowresearch.com<mailto:alp.ars...@xflowresearch.com>; vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> Subject: Re: [E] [vpp-dev] VPPSB Netlink build failing I also met this error when compiling vppsb on centos, just remove the MPLS related macro,and re-compile From: vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> [mailto:vpp-dev@lists.fd.io] On Behalf Of alp.ars...@xflowresearch.com<mailto:alp.ars...@xflowresearch.com> Sent: Friday, November 02, 2018 1:55 PM To: vpp-dev@lists.fd.io<mailto:vpp-dev@lists.fd.io> Subject: [E] [vpp-dev] VPPSB Netlink build failing Dear All, I am trying to build the latest VPP with router and netlink plugins on CentOS 7.5. Here are the steps that I followed. # cd /vpp # ln -sf /vppsb/router/ # ln -sf /vppsb/netlink/ # ln -sf /vppsb/router/router.mk build-data/packages/ # ln -sf /vppsb/netlink/netlink.mk build-data/packages/ # # make V=0 PLATFORM=vpp TAG=vpp_debug netlink-install router-install The command fails with the following error: make[1]: Entering directory `/vpp/build-root/build-vpp_debug-native/netlink' CC librtnl/netns.lo CC librtnl/rtnl.lo /vpp/build-data/../netlink/librtnl/rtnl.c: In function 'rtnl_socket_open': /vpp/build-data/../netlink/librtnl/rtnl.c:269:39: error: 'RTNLGRP_MPLS_ROUTE' undeclared (first use in this function) grpmask(RTNLGRP_NOTIFY) | grpmask(RTNLGRP_MPLS_ROUTE), ^ /vpp/build-data/../netlink/librtnl/rtnl.c:269:39: note: each undeclared identifier is reported only once for each function it appears in /vpp/build-data/../netlink/librtnl/netns.c:69:5: error: 'RTA_VIA' undeclared here (not in a function) _(RTA_VIA, via, 1) \ ^ /vpp/build-data/../netlink/librtnl/netns.c:82:13: note: in definition of macro '_' .type = t, .unique = u, \ ^ /vpp/build-data/../netlink/librtnl/netns.c:86:3: note: in expansion of macro 'ns_foreach_rta' ns_foreach_rta ^ make[1]: *** [librtnl/rtnl.lo] Error 1 make[1]: *** Waiting for unfinished jobs.... make[1]: *** [librtnl/netns.lo] Error 1 make[1]: Leaving directory `/vpp/build-root/build-vpp_debug-native/netlink' make: *** [netlink-build] Error 2 Can anyone help me with this? Or point me towards the versions of VPP and VPPSB where they are working with each other. Regards, Alp Arslan ________________________________ This e-mail message may contain confidential or proprietary information of Mavenir Systems, Inc. or its affiliates and is intended solely for the use of the intended recipient(s). If you are not the intended recipient of this message, you are hereby notified that any review, use or distribution of this information is absolutely prohibited and we request that you delete all copies in your control and contact us by e-mailing to secur...@mavenir.com<mailto:secur...@mavenir.com>. This message contains the views of its author and may not necessarily reflect the views of Mavenir Systems, Inc. or its affiliates, who employ systems to monitor email messages, but make no representation that such messages are authorized, secure, uncompromised, or free from computer viruses, malware, or other defects. Thank You ________________________________ This e-mail message may contain confidential or proprietary information of Mavenir Systems, Inc. or its affiliates and is intended solely for the use of the intended recipient(s). If you are not the intended recipient of this message, you are hereby notified that any review, use or distribution of this information is absolutely prohibited and we request that you delete all copies in your control and contact us by e-mailing to secur...@mavenir.com<mailto:secur...@mavenir.com>. This message contains the views of its author and may not necessarily reflect the views of Mavenir Systems, Inc. or its affiliates, who employ systems to monitor email messages, but make no representation that such messages are authorized, secure, uncompromised, or free from computer viruses, malware, or other defects. Thank You ________________________________ This e-mail message may contain confidential or proprietary information of Mavenir Systems, Inc. or its affiliates and is intended solely for the use of the intended recipient(s). If you are not the intended recipient of this message, you are hereby notified that any review, use or distribution of this information is absolutely prohibited and we request that you delete all copies in your control and contact us by e-mailing to secur...@mavenir.com<mailto:secur...@mavenir.com>. This message contains the views of its author and may not necessarily reflect the views of Mavenir Systems, Inc. or its affiliates, who employ systems to monitor email messages, but make no representation that such messages are authorized, secure, uncompromised, or free from computer viruses, malware, or other defects. Thank You
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#11086): https://lists.fd.io/g/vpp-dev/message/11086 Mute This Topic: https://lists.fd.io/mt/27825214/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
