Hi,
Run NAT plugin in endpoint-dependent mode (add following to startup config “nat
{ endpoint-dependent }”), enable NAT feature “set interface nat44 in tap3 out
GigabitEthernet4/0/0” and create static mapping “nat44 add static mapping tcp
local 192.168.1.2 80 external GigabitEthernet4/0/0 80 out2in-only”.
Matus
From: [email protected] <[email protected]> On Behalf Of carlito nueno
Sent: Friday, December 28, 2018 10:52 PM
To: [email protected]
Subject: Re: [vpp-dev] Question regarding captive portal
NAT might be the right way to achieve this.
This is the command I used with iptables:
iptables -t nat -A eth0 -p tcp --dport 80 -j DNAT --to-destination 192.168.1.2
What is a similar command on VPP-NAT when I am trying to send port 80 traffic
from main interface to tap-device:
main interface: GigabitEthernet4/0/0
tap id: 3 (tap3) with address 192.168.1.2 and host-if-name tapcap
Thanks
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#11814): https://lists.fd.io/g/vpp-dev/message/11814
Mute This Topic: https://lists.fd.io/mt/28506160/21656
Group Owner: [email protected]
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-