Hi,
Could you please provide packet trace?
Matus
-----Original Message-----
From: Carlito Nueno <carlitonu...@gmail.com>
Sent: Friday, January 4, 2019 10:34 PM
To: Matus Fabian -X (matfabia - PANTHEON TECHNOLOGIES at Cisco)
<matfa...@cisco.com>
Cc: vpp-dev@lists.fd.io
Subject: Re: [vpp-dev] Question regarding captive portal
Hi Matus,
Thanks for the info. But I am not able to get it working. tcp 80 packets are
not reaching the http server on tap-interface.
Only way it's working is if I rewrite DNS to point all domains requests to
192.168.2.2.
I am running nat-plugin in endpoint-dependent mode.
All tcp 80 packets from clients connected to GigabitEthernet4/0/0.4 should be
sent to tap4.
Here are my configs:
startup.conf:
unix {
nodaemon
log /var/log/vpp/vpp.log
full-coredump
cli-listen /run/vpp/cli.sock
gid vpp
startup-config /home/test/vpp.conf
}
api-trace {
on
}
api-segment {
gid vpp
}
cpu {
main-core 2
corelist-workers 3
}
nat {
endpoint-dependent
}
dpdk {
num-mbufs 32768
uio-driver auto
}
vpp.conf:
set int state GigabitEthernet2/0/0 up
...
...
set int state GigabitEthernet4/0/0 up
...
...
create loopback interface instance 4
set int l2 bridge loop4 4 bvi
set int ip address loop4 192.168.2.1/24
set int state loop4 up
create sub GigabitEthernet4/0/0 4
set int l2 bridge GigabitEthernet4/0/0.4 4 set int l2 tag-rewrite
GigabitEthernet4/0/0.4 pop 1 set int state GigabitEthernet4/0/0.4 up create tap
id 4 host-ip4-addr 192.168.2.2/24 host-if-name guest set int l2 bridge tap4 4
set int state tap4 up
set interface nat44 in tap4 out GigabitEthernet4/0/0.4
nat44 add static mapping tcp local 192.168.2.2 80 external
GigabitEthernet4/0/0.4 80 out2in-only
nat44 add interface address GigabitEthernet2/0/0 set interface nat44 in loop1
in loop2 in loop3 in loop4 out GigabitEthernet2/0/0
Thank you and Happy New Year!
On Tue, Jan 1, 2019 at 10:23 PM Matus Fabian -X (matfabia - PANTHEON
TECHNOLOGIES at Cisco) <matfa...@cisco.com> wrote:
>
> Hi,
>
>
>
> Run NAT plugin in endpoint-dependent mode (add following to startup config
> “nat { endpoint-dependent }”), enable NAT feature “set interface nat44 in
> tap3 out GigabitEthernet4/0/0” and create static mapping “nat44 add static
> mapping tcp local 192.168.1.2 80 external GigabitEthernet4/0/0 80
> out2in-only”.
>
>
>
> Matus
>
>
>
>
>
> From: vpp-dev@lists.fd.io <vpp-dev@lists.fd.io> On Behalf Of carlito
> nueno
> Sent: Friday, December 28, 2018 10:52 PM
> To: vpp-dev@lists.fd.io
> Subject: Re: [vpp-dev] Question regarding captive portal
>
>
>
> NAT might be the right way to achieve this.
>
> This is the command I used with iptables:
> iptables -t nat -A eth0 -p tcp --dport 80 -j DNAT --to-destination
> 192.168.1.2
>
> What is a similar command on VPP-NAT when I am trying to send port 80 traffic
> from main interface to tap-device:
> main interface: GigabitEthernet4/0/0
> tap id: 3 (tap3) with address 192.168.1.2 and host-if-name tapcap
>
> Thanks
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#11848): https://lists.fd.io/g/vpp-dev/message/11848
Mute This Topic: https://lists.fd.io/mt/28506160/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
