Hi Florin, I'm running this experiment on AWS and its using ENA NICs. I ran vppctl show error command and I did see errors because of bad checksums. Is there a way to turn off tx and rx checksuming through vpp just like we do with ethtool ?
SERVER SIDE: vppctl show errors Count Node Reason Severity 1 dpdk-input no error error 4 arp-reply ARP replies sent error 17 session-queue Packets transmitted info 2 tcp4-listen SYNs received info 4 tcp4-rcv-process Pure ACKs received info 2 tcp4-rcv-process FINs received info 6 tcp4-established Packets pushed into rx fifo info 6 tcp4-established Pure ACKs received info 19 tcp4-output Packets sent info 1 ip4-glean ARP requests sent error 9 ip4-local bad tcp checksum error
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#21100): https://lists.fd.io/g/vpp-dev/message/21100 Mute This Topic: https://lists.fd.io/mt/89961794/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
