Hi, Note we also asked for sh tr, sh hard, sh err, sh log and sh lacp but if I'm not mistaken, we did not saw anything.
Best ben > -----Original Message----- > From: vpp-dev@lists.fd.io <vpp-dev@lists.fd.io> On Behalf Of Chinmaya > Aggarwal > Sent: Monday, November 21, 2022 20:04 > To: vpp-dev@lists.fd.io > Subject: Re: [vpp-dev] How to make VPP work with Mellanox ConnectX-6 NICs? > > Hi Elias, > > We are trying to configure Mellanox ConnectX-5 interface with VPP v22.02 > using RDMA driver. We are able to create rdma interface, but when we try > to configure those rdma interfaces inside lacp bonding we don't see it > working. The "show bond" command only shows one active member rather than > two. > Below are the configuration we tried:- > vpp# create int rdma host-if eth1 vpp# create int rdma host-if eth2 vpp# > set interface promiscuous on eth1/0 vpp# set interface promiscuous on > eth2/1 vpp# set int state eth1/0 up vpp# set int state eth2/1 up vpp# > create bond mode lacp id 0 vpp# bond add BondEthernet0 eth1/0 vpp# bond > add BondEthernet0 eth2/1 vpp# set int state BondEthernet0 up vpp# set int > state eth2/1 up vpp# set int state eth1/0 up > > Can you please tell if we are missing something here? > > This issue has been raised on VPP mailing as well:- > https://lists.fd.io/g/vpp-dev/topic/94956154#22183 > > Thanks and Regards, > Chinmaya Agarwal
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#22216): https://lists.fd.io/g/vpp-dev/message/22216 Mute This Topic: https://lists.fd.io/mt/95069595/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/1480452/21656/631435203/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
