Seems like that vpp/src/plugin/cnat can support sctp,
commit f284c14c7bd8731367ba3527cdfffa610a8c6de4
Author: Nathan Skrzypczak
[email protected]<mailto:[email protected]>
Date: Wed Feb 2 19:31:58 2022 +0100
cnat: Add sctp support
This patch adds SCTP support in the CNat translation primitives.
It also exposes a clib_crc32c_with_init function allowing to set
the init value to start the crc32 with instead of 0.
Type: feature
Change-Id: I86add4cfcac08f2a5a34d1e1841122fafd349fe7
Signed-off-by: Nathan Skrzypczak
[email protected]<mailto:[email protected]>
From: [email protected] <[email protected]> On Behalf Of Christopher Adigun
Sent: Thursday, December 29, 2022 4:00 PM
To: vpp-dev <[email protected]>
Subject: [vpp-dev] LoadBalancer SCTP Support
Hi,
Please, I will like to know if VPP can be used as an SCTP loadbalancer.
I could not find much reference about this..
Checking the help options for the lb command shows only tcp/udp
vpp#
vpp# lb ?
lb as lb as <vip-prefix> [protocol
(tcp|udp) port <n>] [<address> [<address> [...]]] [del] [flush]
lb conf lb conf [ip4-src-address <addr>]
[ip6-src-address <addr>] [buckets <n>] [timeout <s>]
lb flush vip lb flush vip <prefix> [protocol
(tcp|udp) port <n>]
lb set interface nat4 lb set interface nat4 in <intfc>
[del]
lb set interface nat6 lb set interface nat6 in <intfc>
[del]
lb vip lb vip <prefix> [protocol (tcp|udp)
port <n>] [encap (gre6|gre4|l3dsr|nat4|nat6)] [dscp <n>] [type
(nodeport|clusterip) target_port <n>] [new_len <n>] [del]
If yes, kindly share documentation reference (or sample config if possible).
Thanks
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#22395): https://lists.fd.io/g/vpp-dev/message/22395
Mute This Topic: https://lists.fd.io/mt/95933876/21656
Group Owner: [email protected]
Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/1480452/21656/631435203/xyzzy
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
