On Wed, Mar 21, 2007 at 03:09:48PM +0100, Gerhard Hofmann wrote: > Hi all, > > I have some Vserver hosts running that were setup according to this HowTo: > http://www.howtoforge.com/linux_vserver_debian > > Because these are quite a lot of steps I always thought it would be nice > to have a Debian distro that is Vserver-enabled out-of-the-box.
debian already includes Linux-VServer to some extend, so if you install the proper debian vserver kernel, you will get an older but mostly working install ... > Now, in the recenct release of German magazine c't, there was a Knoppix > 5.2 CD which claims to be Vserver-ready. > > Has anybody here already tried Knoppix 5.2 and can share his or her > experiences? > > I booted Knoppix, tried to setup a Vserver like this: > vserver vserver1 build \ > -n vserver1 \ > --hostname vserver1 \ > --interface eth0:192.168.1.133/24 \ > -m debootstrap -- -d sarge > > I get this error message: > /etc/vservers/.defaults/vdirbase/vserver1: Function not implemented first, unless they changed something, you want to use the following command: vserver vserver1 build \ --context 666 \ --hostname vserver1.test.org \ --interface eth0:192.168.1.133/24 \ -m debootstrap -- -d sarge > Any ideas? Or any other Vserver-ready distro out there? IIRC, there are kernel packages for RH/Fedora, Debian and Gentoo and userspace tool packages for most known distros ... note: personally I'm against binary kernel packages ... YMMV HTH, Herbert > TIA > Gerhard > > _______________________________________________ > Vserver mailing list > Vserver@list.linux-vserver.org > http://list.linux-vserver.org/mailman/listinfo/vserver _______________________________________________ Vserver mailing list Vserver@list.linux-vserver.org http://list.linux-vserver.org/mailman/listinfo/vserver