Hi Mellisa, Does the edge router have a route for networks 172.16.16.0/24 and 172.16.17.0/24 pointing to the Vyatta router at 192.168.1.2 or 192.168.100.1 (I'm not clear which is or if both are assigned to eth0)?
Also, what is the address of the Vyatta eth0? Is it 192.168.1.2 or 192.168.100.1? This looks a bit strange: 192.168.100.0/24 [connected(0)] > to 192.168.1.2 via eth0 Thank you, Robyn melissad wrote: > Okay, humbly I have to admit embarrassment over this problem so far less > complex than the ones I read here. Am brand new to Vyatta, and it has > been six years since I did any hands-on router wrangling. > > Application is to isolate two file servers. Static routes are required > (ancient history for me). While the Vyatta router can ping everything, > traffic does not transverse the Vyatta router. The Vyatta firewall is > not enabled, as far as I can determine with my knowledge of the CLI. At > least, I have not enabled it. > > Specifics are below. If anyone can tell me how to remedy this, I would > be greatly appreciative, as 3 days behind schedule on this project. > > PROBLEM: File Servers cannot PING Edge Router : Static route hole in > Vyatta > > Description: > 1. Static Routes: [EMAIL PROTECTED]>show route > 0.0.0.0/0 [static(1)] > to 192.168.100.1 via eth0 > 127.0.0.1/8 [connected(0)] > to 127.0.0.1 via lo > 172.16.16.0/24 [connected(0)] > to 172.16.16.1 via eth1 > 172.16.17.0/24 [connected(0)] > to 172.16.17.1 via eth2 > 192.168.100.0/24 [connected(0)] > to 192.168.1.2 via eth0 > > 2. From [EMAIL PROTECTED] > All pings successful to edge router and to file servers on directly > connected interfaces. > > 3. From File Server 0 AND File Server 1, can ping successfully > Vyatta eth1 - 172.16.16.1 > Vyatta eth2 - 172.16.17.1 > Vyatta eth0 - 192.168.100.1 > > 4. Neither File Server can ping the other OR the Edge Router > > 5. The Edge Router can ping > the directly connected eth0 interfacs on Vyatta > can NOT ping the Vyatta eth1 or eth2 interfaces > hence cannot ping the file servers > can ping the directly connected workstation > > 6. The Workstation can ping the Vyatta eth0 @ 192.168.100.1 through the > Edge Router > > 5. Diagram: > > > > Edge Router > 192.168.100.1/24_____________________Ping OK_____________ > | | > | 192.168.100.100/24 > | > | Workstation0 > | > | > | > _______Ping OK__|______________ > ________________|______________L2 Switch 0 > | > 192.168.1.2/24 > > V65 - Vyatta Router > | | > | | > eth1 | |eth2 > 172.16.16.1/24 172.16.17.1/24 > | | > Ping OK_|_______________|__Ping OK______ > ________|_______________|_______________L2 Switch 1 > | | > | | > 172.16.16.100/24 172.16.17.100/24 > File Server 0 File Server 1 > > Any assistance would be appreciated. > > melissa > > _______________________________________________ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users
