> I have two PCs linked by an E1 link wit Sangoma A101 cards > PC1 > eth0 10.0.0.0/24 > wan0 > local 192.168.0.1 > remote 192.168.0.2 > prefix-length 24 > > PC2 > eth0 10.9.1.0/24 > wan0 > local 192.168.0.2 > remote 192.168.0.1 > prefix-length 24 > > show route does not show the wan ports and I cannot ping them locally
Do the connected routes show up in "show route system forward"? Can you ping the remote end of the wan link (often you can't ping the local end of a non-broadcast media). stig > > Looking at PC1 /var/log/wan0.1.log I see > "Peer is not authorized to use remote address 192.168.0.2" and > equivalent also on PC2 > > The wan link is in PPP mode with authentication type set to none > _______________________________________________ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users