Ok still having issues, these are my nat rules: eth0 is wan 192.168.0.0 is first subnet where server resides 192.168.1.0 is wifi subnet doesn't matter in this case
Thanks everyone. Nate rule 1 { type: "masquerade" outbound-interface: "eth0" protocols: "all" source { network: "192.168.0.0/24" } destination { network: "0.0.0.0/0" } } rule 2 { type: "masquerade" outbound-interface: "eth0" protocols: "all" source { network: "192.168.1.0/24" } destination { network: "0.0.0.0/0" } } rule 3 { type: "destination" inbound-interface: "eth0" protocols: "tcp" destination { address: "71.62.193.105" port-name http } inside-address { address: 192.168.0.105 } } On Mon, 2008-01-28 at 21:39 -0800, An-Cheng Huang wrote: > Hi Nate, > > The "inside-address" is the internal (private) IP address of your Web server, > which in your case is 192.168.0.105. The "destination address" should > actually be the public IP address that outside clients will use to access > your server, so usually this is the public IP address of your router. > > An-Cheng > > Nathan McBride wrote: > > I went and looked at the old docs. I thought I set them up correctly > > but aparently I didn't. I'll im trying to do is to get people on the > > internet to view the website on my comp (192.168.0.105). The only > > difference that i noticed when I tried to commit the example in the old > > docs was that vc3 requires an 'inside-address'. Could someone please > > help me correct this to get it working? > > > > rule 3 { > > type: "destination" > > inbound-interface: "eth0" > > protocols: "tcp" > > destination { > > address: "192.168.0.105" > > port-name http > > } > > inside-address { > > address: 192.168.0.105 <-- didn't know what to put here > > exactly... > > } > > } > > _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users