Here's what I use to port-forward ssh; just adjust for address (where destination address is the public IP) and change it to http.
rule 2 { type: "destination" inbound-interface: "eth0" protocols: "tcp" source { network: 0.0.0.0/0 } destination { address: 1.2.3.4 port-name ssh } inside-address { address: 10.0.0.30 } } Best, Justin On Jan 29, 2008 7:46 AM, Nathan McBride <[EMAIL PROTECTED]> wrote: > Can someone please help me get this worked out? > Nate > > > > Ok these are my nat rules now, I didn't see a command to change the rule > > numbers so i just redid them all by hand. It still doesn't work. > > > > rule 1 { > > type: "destination" > > inbound-interface: "eth0" > > protocols: "tcp" > > destination { > > address: "71.62.193.105" > > port-name http > > } > > inside-address { > > address: 192.168.0.105 > > } > > } > > rule 2 { > > type: "masquerade" > > outbound-interface: "eth0" > > protocols: "all" > > source { > > network: "192.168.0.0/24" > > } > > destination { > > network: "0.0.0.0/0" > > } > > } > > rule 3 { > > type: "masquerade" > > outbound-interface: "eth0" > > protocols: "all" > > source { > > network: "192.168.1.0/24" > > } > > destination { > > network: "0.0.0.0/0" > > } > > } > > > > Nate > > > > On Mon, 2008-01-28 at 21:39 -0800, An-Cheng Huang wrote: > > > Hi Nate, > > > > > > The "inside-address" is the internal (private) IP address of your Web > > > server, which in your case is 192.168.0.105. The "destination address" > > > should actually be the public IP address that outside clients will use to > > > access your server, so usually this is the public IP address of your > > > router. > > > > > > An-Cheng > > > > > > Nathan McBride wrote: > > > > I went and looked at the old docs. I thought I set them up correctly > > > > but aparently I didn't. I'll im trying to do is to get people on the > > > > internet to view the website on my comp (192.168.0.105). The only > > > > difference that i noticed when I tried to commit the example in the old > > > > docs was that vc3 requires an 'inside-address'. Could someone please > > > > help me correct this to get it working? > > > > > > > > rule 3 { > > > > type: "destination" > > > > inbound-interface: "eth0" > > > > protocols: "tcp" > > > > destination { > > > > address: "192.168.0.105" > > > > port-name http > > > > } > > > > inside-address { > > > > address: 192.168.0.105 <-- didn't know what to put here > > > > exactly... > > > > } > > > > } > > > > > > > > _______________________________________________ > > Vyatta-users mailing list > > Vyatta-users@mailman.vyatta.com > > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > > _______________________________________________ > Vyatta-users mailing list > Vyatta-users@mailman.vyatta.com > http://mailman.vyatta.com/mailman/listinfo/vyatta-users > _______________________________________________ Vyatta-users mailing list Vyatta-users@mailman.vyatta.com http://mailman.vyatta.com/mailman/listinfo/vyatta-users