I have recently acquired a new PowerBook 800/256 with and Airport Card to work along side and in conjunction with a G4/867 with an Airport Card... (both running 10.2.1) After lots of mucking about I am putting up my hands. Nick at Apple Centre Joondalup has not had little or no experience with 10.2 in regards to Airport and is not sure of a solution but has to date been very helpful and patient with me. I can get Airport to work and can exchange files and operate the internet via the connection on the G4 but the problem is that when either or both of the computers gets turned off ALL of the setting are lost and I have to create a new network and re-set my sharing and networking preferences...
How is it possible to have both machines remember these settings permanently... Any advice or comments are welcome or my next step is to spend and hour or so (minimum) on the phone to Apple Help.... Thanks in anticipation, Phil Phil, Karen, Chris, Graham, Matthew Goodall-Smith Phone: 08-92721984 Office: 08-93715455 Facsimile: 08-93715975 Karen Mobile: 0402-033027 Phil Mobile: 0412-522412 [Non-text portions of this message have been removed]