I used a friends PowerBook G4 on the weekend. At home I used a static
IP / ethernet setup and updated it to 10.4.11.
I then went on the road and installed and used a Three mobile
broadband modem (drivers downloaded before I left.)
Now I'm back and not for love nor money can I get it to work on an
the ethernet network. I've removed the wireless modem device, checked
all the IP settings (unchanged from before), the ethernet port is
shown as connected but no browsing / seeing other machines on the
network. Tried a PRAM reset without luck and new IP address.
Any thoughts people?
Cheers, Antony.
--
==================================================================
= = =
= Antony N. Lord = http://antonylord.com =
= [EMAIL PROTECTED] = Perth, Western Australia =
= = =
==================================================================
-- The WA Macintosh User Group Mailing List --
Archives - <http://www.wamug.org.au/mailinglist/archives.shtml>
Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml>
Unsubscribe - <mailto:[EMAIL PROTECTED]>
