hi Kevin
the printer was not in use for approx 6 month it could be that the
toner has taken on moisture, another thing is (if i'm right) both
cartridges are refilled it could be that the drum (in the cartridge)
is of poor quality
did you try to give the cartridge a shake to loosen up the tone
inside & also to evenly distribute the toner inside the cartridge
may be the cartridge needs a warm place for a while to dry the toner
as i mentioned you may try any other old printer & select the driver
within powerprint
sorry
cheers James
On 07/10/2009, at 16:22, KEVIN Lock wrote:
James,
Thankyou for the printer gear. The driver loaded well and the
printer responded to the print command, but unfortunately the
output is of poor quality.
I have tried the other cartridge, but it is no better. I have also
tried it at different resolutions. I have also given it a good
blow out with compressed air.
Is there something I am missing here? It would be good if I could
get the print to an acceptable quality.
Not a big worry, but just in case you have seen this problem before
and fixed it.
regards
Kevin
which time?
i'm intending to go out for a job, but can adjust with the time,
best 8am onwards
cheers James
SAD Technic
Video Productions, Electronic repairs
U3 / 6 Chalkley Pl
Bayswater WA 6053
+618 9370 5307,+618 6262 5707, 0414 421 132
<http://www.iinet.net.au/~saddas>http://www.iinet.net.au/~saddas
skype: barleeway
over 40 years in electronics
On 06/10/2009, at 11:15, KEVIN Lock wrote:
James,
Thanks, that will go to a good home!
I am heading north to Quinns tomorrow, so will drop by SAD
Technic tomorrow morning, if that is convenient?
regards
Kevin
hi Kevin
it's ready for pickup:
laserjet 6L, paralell to usb cable, powerprint software package
(manual, cd, serial number)
cheers James
James,
All the G3s I have, have USB ports and I have a couple of USB
to Parallel cables.
I would like to give it a try if you care to let me have it.
The driver would be handy if you find it.
Please let me know when and where would be convenient to do a
collect.
thanks,
Kevin
-- The WA Macintosh User Group Mailing List --
Archives - <http://www.wamug.org.au/mailinglist/archives.shtml>
Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml>
Unsubscribe - <mailto:wamug-unsubscr...@wamug.org.au>
-- The WA Macintosh User Group Mailing List --
Archives - <http://www.wamug.org.au/mailinglist/archives.shtml>
Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml>
Unsubscribe - <mailto:wamug-unsubscr...@wamug.org.au>
SAD Technic
Video Productions, Electronic repairs
U3 / 6 Chalkley Pl
Bayswater WA 6053
+618 9370 5307,+618 6262 5707, 0414 421 132
http://www.iinet.net.au/~saddas
skype: barleeway
over 40 years in electronics
-- The WA Macintosh User Group Mailing List --
Archives - <http://www.wamug.org.au/mailinglist/archives.shtml>
Guidelines - <http://www.wamug.org.au/mailinglist/guidelines.shtml>
Unsubscribe - <mailto:wamug-unsubscr...@wamug.org.au>