On Tuesday, November 22, 2016 at 7:33:31 AM UTC-5, Dafydd P wrote: > > Hi Guys > > Have been following this thread with interest as I am having the same > issues. Current setup is a WMR300 connected to a RPi 3 running Rasbian > Jessie. Installed 3.6.2 and had the same usb issue. Tried installing the > 0.15RC2 driver but had a different error. As it was a new setup I > downgraded to 3.5.0 to ensure that all was working ok. This was successful > so I'm happy the hardware is ok. > > I will try and put 3.6.2 back on and retry the updated driver. If anybody > has any further info about this it would be much appreciated, >
daff, could you post both of the errors you saw (weewx 3.6.2 and weewx 3.6.2 with 0.15rc2 driver) then try weewx 3.6.2, but with the attached 0.15rc3. i would like to be sure that the problem is just in the driver, not in the weewx version. if that fails, post the exception stack then try weewx 3.6.2 with the 0.9 driver from weewx 3.5.0 there are bugs in rain calculation and barometer in 0.9, these are fixed by 0.15 whereas 0.15rc2 used the 'repr' approach, 0.15rc3 reverts to the 'args' approach for inspecting a USBError type. the args approach is known to fail on some versions of libusb/pyusb. cameron, i know your pain... m -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
