On my WMR88 (WMR100-driver) I managed to get the battery status from the data packages read from the console. But on the WMR200 it is not that obvious. I have tried with two temp.sensors going low on battery but I can't figure out what WMR200 is doing with that information. Maybe someone here have an idea?
The protocol-information is here: http://www.bashewa.com/wmr200-protocol.php This is what I get with debug-mode when I change channel on a sensor with low battery (current temp.sensors with good battery are Ch.1+2+3+5) : : *(Added Ch.4)* Feb 27 16:46:07 eBox3350 weewx[28036]: wmr200: MainThread: D Packet raw:d9 08 50 10 84 00 c5 01 Feb 27 16:48:07 eBox3350 weewx[28036]: wmr200: MainThread: D Packet raw:d9 08 40 10 94 00 c5 01 : *(Added Ch.6)* Feb 27 19:25:05 eBox3350 weewx[31196]: wmr200: MainThread: D Packet raw:d9 08 40 10 94 00 c5 01 Feb 27 19:26:04 eBox3350 weewx[31196]: wmr200: MainThread: D Packet raw:d9 08 00 10 d4 00 c5 01 : *(Changed Ch.6 => Ch.10)* Feb 27 19:54:04 eBox3350 weewx[31196]: wmr200: MainThread: D Packet raw:d9 08 00 10 d4 00 c5 01 Feb 27 19:55:03 eBox3350 weewx[31196]: wmr200: MainThread: D Packet raw:d9 08 00 10 d4 08 cd 01 *: (No change, did the system note that ch.6 is missing** when scan-period is over? So this is Ch.4+6+10 on low batt?)* Feb 27 20:09:04 eBox3350 weewx[32260]: wmr200: MainThread: D Packet raw:d9 08 00 10 d4 08 cd 01 Feb 27 20:09:28 eBox3350 weewx[32260]: wmr200: MainThread: D Packet raw:d9 08 40 10 94 08 cd 01 : *(Changed Ch.10 => Ch.7)* Feb 27 20:13:04 eBox3350 weewx[32260]: wmr200: MainThread: D Packet raw:d9 08 40 10 94 08 cd 01 Feb 27 20:13:38 eBox3350 weewx[32260]: wmr200: MainThread: D Packet raw:d9 08 40 10 94 09 ce 01 *: (No change, did the system note that ch.10 is missing when scan-period is over? So this is Ch.4+7+10 on low batt?)*Feb 27 20:28:03 eBox3350 weewx[32260]: wmr200: MainThread: D Packet raw:d9 08 40 10 94 09 ce 01 Feb 27 20:28:49 eBox3350 weewx[32260]: wmr200: MainThread: D Packet raw:d9 08 40 18 94 01 ce 01 *: (Changed Ch.7 => Ch.6)* Feb 27 20:43:03 eBox3350 weewx[32260]: wmr200: MainThread: D Packet raw:d9 08 40 18 94 01 ce 01 Feb 27 20:44:03 eBox3350 weewx[32260]: wmr200: MainThread: D Packet raw:d9 08 00 18 d4 01 ce 01 *: (No change, did the system note that ch.10 is missing when scan-period is over? So this is Ch.4+6+7 on low batt?)*Feb 27 20:57:02 eBox3350 weewx[32260]: wmr200: MainThread: D Packet raw:d9 08 00 18 d4 01 ce 01 Feb 27 20:57:42 eBox3350 weewx[32260]: wmr200: MainThread: D Packet raw:d9 08 00 19 d4 00 ce 01 *: (Note that this SHOULD be as above i.e. * *MainThread: D Packet raw:d9 08 00 10 d4 00 c5 01 when running Ch4+6 with low batt, but it is not!)*Now, does anyone see any pattern here? -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.