Hi, I see nothing obviously wrong there. It's possible that the SteelSeries Weather Gauges can't find you data file (gauge-data.txt), what do you have against realTimeURL_weewx in gauges.js (it about line 68). This tells the Steel Series Weatehr Gauges where to find you gauge-data.txt file.
Gary On Wednesday, 15 March 2017 12:33:46 UTC+10, Sam wrote: > > Hi, and thanks to all in advance, > > > I am trying to install SteelSeries gauges to my weewx raspberry pi. Weewx > was installed from a DEB package. It is partly working in that I see a web > page at http://192.168.1.125/weewx/ss/ that mentions at the > bottom....... > > > Interval: 5 minutes > Station: Simulator > Software: WeeWX 3.7.0 <http://www.weewx.com/> > Scripts: by Mark Crossley > Gauges: SteelSeries <https://github.com/HanSolo/SteelSeries-Canvas> by > Gerrit Grunwald > > > But that is it. No gauges are displayed. Included are some Log files. > > Here is what I have done. > > copy weather_server/WeeWX/skin.conf WEEWX_SKINS_DIR/ss/ > > copy weather_server/WeeWX/index.html.tmpl WEEWX_SKINS_DIR/ss/ > > copy weather_server/WeeWX/gauge-data.txt.tmpl WEEWX_SKINS_DIR/ss/ > > copy web_server/css folder to WEEWX_SKINS_DIR/ss/ > > copy web_server/scripts folder to WEEWX_SKINS_DIR/ss/ > > edied WEEWX_SKINS_DIR/ss/scripts/gauges.js > > weatherProgram : 6 > > imgPathURL : '' > > stationTimeout : 10 // set to twice archive interval, in minutes > > showUvGauge : false // false if there is no UV sensor > > showSolarGauge : false // false if there is no solar radiation sensor > > add a SteelSeries section to StdReport in weewx.conf > > [StdReport] > > ... > > [[SteelSeries]] > > skin = ss > > HTML_ROOT = /var/www/html/weewx/ss > > > > > > > > wee_debug output > > > > pi@raspberrypi:~ $ wee_debug --info > > Using verbosity=1, displaying most info > > > > wee_debug output will be sent to stdout(console) > > > > Using configuration file /etc/weewx/weewx.conf > > Using database binding 'wx_binding', which is bound to database > 'archive_sqlite' > > > > System info > > CPU implementer: 0x41 > > Features: half thumb fastmult vfp edsp neon vfpv3 tls > vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 > > CPU architecture: 7 > > BogoMIPS: 76.80 > > Hardware: BCM2709 > > CPU revision: 4 > > CPU part: 0xd03 > > model name: ARMv7 Processor rev 4 (v7l) > > Serial: 000000000eccebc4 > > processor: 3 > > CPU variant: 0x0 > > Revision: a02082 > > > > Operating system: debian 8.0 > > Linux raspberrypi 4.4.50-v7+ #970 SMP Mon Feb 20 > 19:18:29 GMT 2017 armv7l > > 1 minute load average: 0.00 > > 5 minute load average: 0.03 > > 15 minute load average: 0.00 > > > > General weewx info > > Weewx version 3.7.0 detected. > > > > Station info > > Station type: Simulator > > Driver: weewx.drivers.simulator > > > > Driver info > > [Simulator] > > # This section is for the weewx weather station simulator > > > > # The time (in seconds) between LOOP packets. > > loop_interval = 2.5 > > > > # The simulator mode can be either 'simulator' or 'generator'. > > # Real-time simulator. Sleep between each LOOP packet. > > mode = simulator > > # Generator. Emit LOOP packets as fast as possible (useful for > testing). > > #mode = generator > > > > # The start time. If not specified, the default is to use the present > time. > > #start = 2011-01-01 00:00 > > > > # The driver to use: > > driver = weewx.drivers.simulator > > > > Currently installed extensions > > No extensions installed > > > > Archive info > > Database name: weewx.sdb > > Table name: archive > > Unit system: 1 (US) > > First good timestamp: 2017-03-13 22:35:00 EDT (1489458900) > > Last good timestamp: 2017-03-14 21:35:00 EDT (1489541700) > > Number of records: 274 > > weewx (weewx.conf) is set to use an archive interval of 300 seconds. > > The station hardware was not interrogated in determining archive > interval. > > > > Databases configured in weewx.conf > > Database name: weewx.sdb > > Database driver: weedb.sqlite > > > > Database name: weewx > > Database driver: weedb.mysql > > Database host: localhost > > > > > > Parsed and obfuscated weewx.conf > > # WEEWX CONFIGURATION FILE > > # > > # Copyright (c) 2009-2015 Tom Keffer <tke...@gmail.com <javascript:>> > > # See the file LICENSE.txt for your rights. > > > > > ############################################################################## > > > > # This section is for general configuration information. > > > > # Set to 1 for extra debug info, otherwise comment it out or set to zero > > debug = 1 > > > > # Root directory of the weewx data file hierarchy for this station > > WEEWX_ROOT = / > > > > # How long to wait before timing out a socket (FTP, HTTP) connection > > socket_timeout = 20 > > > > # Do not modify this. It is used when installing and updating weewx. > > version = 3.7.0 > > > > > ############################################################################## > > > > # This section is for information about the station. > > > > [Station] > > > > # Description of the station location > > location = Up on the Pole > > > > # Latitude and longitude in decimal degrees > > latitude = 43.149 > > longitude = -74.6863 > > > > # Altitude of the station, with unit it is in. This is downloaded from > > # from the station if the hardware supports it. > > altitude = 710, foot > > > > # Set to type of station hardware. There must be a corresponding stanza > > # in this file with a 'driver' parameter indicating the driver to be > used. > > station_type = Simulator > > > > # If you have a website, you may specify an URL > > #station_url = http://www.example.com > > > > # The start of the rain year (1=January; 10=October, etc.). This is > > # downloaded from the station if the hardware supports it. > > rain_year_start = 1 > > > > # Start of week (0=Monday, 6=Sunday) > > week_start = 6 > > > > > ############################################################################## > > > > [Simulator] > > # This section is for the weewx weather station simulator > > > > # The time (in seconds) between LOOP packets. > > loop_interval = 2.5 > > > > # The simulator mode can be either 'simulator' or 'generator'. > > # Real-time simulator. Sleep between each LOOP packet. > > mode = simulator > > # Generator. Emit LOOP packets as fast as possible (useful for > testing). > > #mode = generator > > > > # The start time. If not specified, the default is to use the present > time. > > #start = 2011-01-01 00:00 > > > > # The driver to use: > > driver = weewx.drivers.simulator > > > > > ############################################################################## > > > > # This section is for uploading data to Internet sites > > > > [StdRESTful] > > > > [[StationRegistry]] > > # To register this weather station with weewx, set this to true > > register_this_station = false > > > > [[AWEKAS]] > > # This section is for configuring posts to AWEKAS. > > > > # If you wish to do this, set the option 'enable' to true, > > # and specify a username and password. > > enable = false > > username = XXX obfuscated by wee_debug XXX > > # To guard against parsing errors, put your password in quotes: > > password = XXX obfuscated by wee_debug XXX > > > > [[CWOP]] > > # This section is for configuring posts to CWOP. > > > > # If you wish to do this, set the option 'enable' to true, > > # and specify the station ID (e.g., CW1234). > > enable = false > > station = XXX obfuscated by wee_debug XXX > > > > # If this is an APRS (radio amateur) station, uncomment > > # the following and replace with a passcode (e.g., 12345). > > #passcode = replace_me (APRS stations only) > > > > [[PWSweather]] > > # This section is for configuring posts to PWSweather.com. > > > > # If you wish to do this, set the option 'enable' to true, > > # and specify a station and password. > > enable = false > > station = XXX obfuscated by wee_debug XXX > > # To guard against parsing errors, put your password in quotes: > > password = XXX obfuscated by wee_debug XXX > > > > [[WOW]] > > # This section is for configuring posts to WOW. > > > > # If you wish to do this, set the option 'enable' to true, > > # and specify a station and password. > > enable = false > > station = XXX obfuscated by wee_debug XXX > > # To guard against parsing errors, put your password in quotes: > > password = XXX obfuscated by wee_debug XXX > > > > [[Wunderground]] > > # This section is for configuring posts to the Weather Underground. > > > > # If you wish to do this, set the option 'enable' to true, > > # and specify a station (e.g., 'KORHOODR3') and password. > > enable = false > > station = XXX obfuscated by wee_debug XXX > > # To guard against parsing errors, put your password in quotes: > > password = XXX obfuscated by wee_debug XXX > > > > # Set the following to True to have weewx use the WU "Rapidfire" > > # protocol. Not all hardware can support it. See the User's Guide. > > rapidfire = False > > > > > ############################################################################## > > > > # This section specifies what reports, using which skins, to generate. > > > > [StdReport] > > > > # Where the skins reside, relative to WEEWX_ROOT > > SKIN_ROOT = /etc/weewx/skins > > > > # Where the generated reports should go, relative to WEEWX_ROOT > > HTML_ROOT = /var/www/html/weewx > > > > # The database binding indicates which data should be used in reports. > > data_binding = wx_binding > > > > # Each of the following subsections defines a report that will be run. > > [[SteelSeries]] > > skin = ss > > HTML_ROOT = /var/www/html/weewx/ss > > [[StandardReport]] > > # See the customizing guide to change the units, plot types and > line > > # colors, modify the fonts, display additional sensor data, and > other > > # customizations. Many of those changes can be made here by > overriding > > # parameters, or by modifying templates within the skin itself. > > > > # The StandardReport uses the 'Standard' skin, which contains the > > # images, templates and plots for the report. > > skin = Standard > > [[[Units]]] > > [[[[Groups]]]] > > group_altitude = foot > > group_speed2 = mile_per_hour2 > > group_pressure = inHg > > group_rain = inch > > group_rainrate = inch_per_hour > > group_temperature = degree_F > > group_degree_day = degree_F_day > > group_speed = mile_per_hour > > > > [[FTP]] > > # FTP'ing the results to a webserver is treated as just another > report, > > # albeit one with an unusual report generator! > > skin = Ftp > > > > # If you wish to use FTP, uncomment and fill out the next four > lines. > > #user = replace with the ftp username > > #password = replace with the ftp password; put in quotes to guard > against parsing errors. > > #server = replace with the ftp server name, e.g, > www.threefools.org > > #path = replace with the ftp destination directory (e.g., /weather) > > > > # Set to True for an FTP over TLS (FTPS) connection. Not all > servers > > # support this. > > secure_ftp = False > > > > # To upload files from something other than what HTML_ROOT is set > > # to above, specify a different HTML_ROOT here. > > #HTML_ROOT = /var/www/html/weewx > > > > # Most FTP servers use port 21 > > port = 21 > > > > # Set to 1 to use passive mode, zero for active mode > > passive = 1 > > > > [[RSYNC]] > > # rsync'ing to a webserver is treated as just another report > > skin = Rsync > > > > # If you wish to use rsync, you must configure passwordless ssh > using > > # public/private key authentication from the user account that > weewx > > # runs as to the user account on the remote machine where the files > > # will be copied. > > # > > # The following three lines determine where files will be sent. > > #server = replace with the rsync server name, e.g, > www.threefools.org > > #path = replace with the rsync destination directory (e.g., > /weather) > > #user = replace with the rsync username > > > > # Rsync can be configured to remove files from the remote server if > > # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if > you > > # make a mistake in the remote path, you could could > unintentionally > > # cause unrelated files to be deleted. Set to 1 to enable remote > file > > # deletion, zero to allow files to accumulate remotely. > > delete = 0 > > > > > ############################################################################## > > > > # This service acts as a filter, converting the unit system coming from > > # the hardware to a unit system in the database. > > > > [StdConvert] > > > > # The target_unit affects only the unit system in the database. Once > > # chosen it cannot be changed without converting the entire database. > > # Modification of target_unit after starting weewx will result in > > # corrupt data - the database will contain a mix of US and METRIC data. > > # > > # The value of target_unit does not affect the unit system for > > # reporting - reports can display US, Metric, or any combination of > units. > > # > > # In most cases, target_unit should be left as the default: US > > # > > # In particular, those migrating from a standard wview installation > > # should use US since that is what the wview database contains. > > > > # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! > > target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' > > > > > ############################################################################## > > > > # This section can adjust data using calibration expressions. > > > > [StdCalibrate] > > > > [[Corrections]] > > # For each type, an arbitrary calibration expression can be given. > > # It should be in the units defined in the StdConvert section. > > # Example: > > foo = foo + 0.2 > > > > > ############################################################################## > > > > # This section is for quality control checks. If units are not specified, > > # values must be in the units defined in the StdConvert section. > > > > [StdQC] > > > > [[MinMax]] > > barometer = 26, 32.5, inHg > > outTemp = -40, 120, degree_F > > inTemp = 10, 120, degree_F > > outHumidity = 0, 100 > > inHumidity = 0, 100 > > windSpeed = 0, 120, mile_per_hour > > pressure = 24, 34.5, inHg > > > > > ############################################################################## > > > > # This section controls the origin of derived values. > > > > [StdWXCalculate] > > > > [[Calculations]] > > # Derived quantities are calculated by this service. Possible > values are: > > # hardware - use the value provided by hardware > > # software - use the value calculated by weewx > > # prefer_hardware - use value provide by hardware if available, > > # otherwise use value calculated by weewx > > > > pressure = prefer_hardware > > barometer = prefer_hardware > > altimeter = prefer_hardware > > windchill = prefer_hardware > > heatindex = prefer_hardware > > dewpoint = prefer_hardware > > inDewpoint = prefer_hardware > > rainRate = prefer_hardware > > > > > ############################################################################## > > > > # For hardware that supports it, this section controls how often the > > # onboard clock gets updated. > > > > [StdTimeSynch] > > > > # How often to check the weather station clock for drift (in seconds) > > clock_check = 14400 > > > > # How much it can drift before we will correct it (in seconds) > > max_drift = 5 > > > > > ############################################################################## > > > > # This section is for configuring the archive service. > > > > [StdArchive] > > > > # If the station hardware supports data logging then the archive > interval > > # will be downloaded from the station. Otherwise, specify it (in > seconds). > > archive_interval = 300 > > > > # If possible, new archive records are downloaded from the station > > # hardware. If the hardware does not support this, then new archive > > # records will be generated in software. > > # Set the following to "software" to force software record generation. > > record_generation = hardware > > > > # Whether to include LOOP data in hi/low statistics > > loop_hilo = True > > > > # The data binding used to save archive records > > data_binding = wx_binding > > > > > ############################################################################## > > > > # This section binds a data store to a database. > > > > [DataBindings] > > > > [[wx_binding]] > > # The database must match one of the sections in [Databases]. > > # This is likely to be the only option you would want to change. > > database = archive_sqlite > > # The name of the table within the database > > table_name = archive > > # The manager handles aggregation of data for historical summaries > > manager = weewx.wxmanager.WXDaySummaryManager > > # The schema defines the structure of the database. > > # It is *only* used when the database is created. > > schema = schemas.wview.schema > > > > > ############################################################################## > > > > # This section defines various databases. > > > > [Databases] > > > > # A SQLite database is simply a single file > > [[archive_sqlite]] > > database_type = SQLite > > database_name = weewx.sdb > > > > # MySQL > > [[archive_mysql]] > > database_type = MySQL > > database_name = weewx > > > > > ############################################################################## > > > > # This section defines defaults for the different types of databases. > > > > [DatabaseTypes] > > > > # Defaults for SQLite databases > > [[SQLite]] > > driver = weedb.sqlite > > # Directory in which the database files are located > > SQLITE_ROOT = /var/lib/weewx > > > > # Defaults for MySQL databases > > [[MySQL]] > > driver = weedb.mysql > > # The host where the database is located > > host = localhost > > # The user name for logging in to the host > > user = XXX obfuscated by wee_debug XXX > > # The password for the user name. Put in quotes to guard against > parsing errors. > > password = XXX obfuscated by wee_debug XXX > > > > > ############################################################################## > > > > # This section configures the internal weewx engine. > > > > [Engine] > > > > [[Services]] > > # This section specifies the services that should be run. They are > > # grouped by type, and the order of services within each group > > # determines the order in which the services will be run. > > prep_services = weewx.engine.StdTimeSynch > > data_services = , > > process_services = weewx.engine.StdConvert, > weewx.engine.StdCalibrate, weewx.engine.StdQC, > weewx.wxservices.StdWXCalculate > > archive_services = weewx.engine.StdArchive > > restful_services = weewx.restx.StdStationRegistry, > weewx.restx.StdWunderground, weewx.restx.StdPWSweather, > weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS > > report_services = weewx.engine.StdPrint, weewx.engine.StdReport > > > > wee_debug report successfully generated > > 2017 [try http://www.rsyslog.com/e/2007 ] > > Mar 14 14:20:15 raspberrypi weewx[13193]: manager: Added record 2017-03-14 > 14:20:00 EDT (1489515600) to database 'weewx.sdb' > > Mar 14 14:20:15 raspberrypi weewx[13193]: manager: Added record 2017-03-14 > 14:20:00 EDT (1489515600) to daily summary in 'weewx.sdb' > > Mar 14 14:20:15 raspberrypi weewx[13193]: reportengine: Running reports > for latest time in the database. > > Mar 14 14:20:15 raspberrypi weewx[13193]: reportengine: Running report > SteelSeries > > Mar 14 14:20:15 raspberrypi weewx[13193]: reportengine: Found > configuration file /etc/weewx/skins/ss/skin.conf for report SteelSeries > > Mar 14 14:20:15 raspberrypi weewx[13193]: copygenerator: copied 6 files to > /var/www/html/weewx/ss > > Mar 14 14:20:15 raspberrypi weewx[13193]: cheetahgenerator: using search > list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', > 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', > 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras'] > > Mar 14 14:20:15 raspberrypi weewx[13193]: manager: Daily summary version > is 2.0 > > Mar 14 14:20:16 raspberrypi weewx[13193]: cheetahgenerator: Generated 2 > files for report SteelSeries in 0.69 seconds > > Mar 14 14:20:16 raspberrypi weewx[13193]: manager: Daily summary version > is 2.0 > > Mar 14 14:20:17 raspberrypi weewx[13193]: imagegenerator: Generated 11 > images for SteelSeries in 0.75 seconds > > Mar 14 14:20:17 raspberrypi weewx[13193]: reportengine: Running report > StandardReport > > Mar 14 14:20:17 raspberrypi weewx[13193]: reportengine: Found > configuration file /etc/weewx/skins/Standard/skin.conf for report > StandardReport > > Mar 14 14:20:17 raspberrypi weewx[13193]: cheetahgenerator: using search > list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', > 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', > 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras'] > > Mar 14 14:20:17 raspberrypi weewx[13193]: manager: Daily summary version > is 2.0 > > Mar 14 14:20:20 raspberrypi weewx[13193]: cheetahgenerator: Generated 14 > files for report StandardReport in 3.38 seconds > > Mar 14 14:20:20 raspberrypi weewx[13193]: manager: Daily summary version > is 2.0 > > Mar 14 14:20:21 raspberrypi weewx[13193]: imagegenerator: Generated 12 > images for StandardReport in 0.71 seconds > > Mar 14 14:20:21 raspberrypi weewx[13193]: copygenerator: copied 9 files to > /var/www/html/weewx > > Mar 14 14:20:21 raspberrypi weewx[13193]: reportengine: Running report FTP > > Mar 14 14:20:21 raspberrypi weewx[13193]: reportengine: Found > configuration file /etc/weewx/skins/Ftp/skin.conf for report FTP > > Mar 14 14:20:21 raspberrypi weewx[13193]: ftpgenerator: FTP upload not > requested. Skipped. > > Mar 14 14:20:21 raspberrypi weewx[13193]: reportengine: Running report > RSYNC > > Mar 14 14:20:21 raspberrypi weewx[13193]: reportengine: Found > configuration file /etc/weewx/skins/Rsync/skin.conf for report RSYNC > > Mar 14 14:20:21 raspberrypi weewx[13193]: rsyncgenerator: rsync upload not > requested. Skipped. > > > > > > > > Latest Logs > > > > 2017 [try http://www.rsyslog.com/e/2007 ] > > Mar 14 22:20:15 raspberrypi weewx[13193]: manager: Added record 2017-03-14 > 22:20:00 EDT (1489544400) to database 'weewx.sdb' > > Mar 14 22:20:15 raspberrypi weewx[13193]: manager: Added record 2017-03-14 > 22:20:00 EDT (1489544400) to daily summary in 'weewx.sdb' > > Mar 14 22:20:15 raspberrypi weewx[13193]: reportengine: Running reports > for latest time in the database. > > Mar 14 22:20:15 raspberrypi weewx[13193]: reportengine: Running report > SteelSeries > > Mar 14 22:20:15 raspberrypi weewx[13193]: reportengine: Found > configuration file /etc/weewx/skins/ss/skin.conf for report SteelSeries > > Mar 14 22:20:15 raspberrypi weewx[13193]: copygenerator: copied 0 files to > /var/www/html/weewx/ss > > Mar 14 22:20:15 raspberrypi weewx[13193]: cheetahgenerator: using search > list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', > 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', > 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras'] > > Mar 14 22:20:15 raspberrypi weewx[13193]: manager: Daily summary version > is 2.0 > > Mar 14 22:20:15 raspberrypi weewx[13193]: cheetahgenerator: Generated 2 > files for report SteelSeries in 0.10 seconds > > Mar 14 22:20:15 raspberrypi weewx[13193]: manager: Daily summary version > is 2.0 > > Mar 14 22:20:16 raspberrypi weewx[13193]: imagegenerator: Generated 11 > images for SteelSeries in 0.78 seconds > > Mar 14 22:20:16 raspberrypi weewx[13193]: reportengine: Running report > StandardReport > > Mar 14 22:20:16 raspberrypi weewx[13193]: reportengine: Found > configuration file /etc/weewx/skins/Standard/skin.conf for report > StandardReport > > Mar 14 22:20:16 raspberrypi weewx[13193]: cheetahgenerator: using search > list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', > 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', > 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras'] > > Mar 14 22:20:16 raspberrypi weewx[13193]: manager: Daily summary version > is 2.0 > > Mar 14 22:20:17 raspberrypi weewx[13193]: cheetahgenerator: Generated 14 > files for report StandardReport in 1.10 seconds > > Mar 14 22:20:17 raspberrypi weewx[13193]: manager: Daily summary version > is 2.0 > > Mar 14 22:20:18 raspberrypi weewx[13193]: imagegenerator: Generated 12 > images for StandardReport in 0.77 seconds > > Mar 14 22:20:18 raspberrypi weewx[13193]: copygenerator: copied 0 files to > /var/www/html/weewx > > Mar 14 22:20:18 raspberrypi weewx[13193]: reportengine: Running report FTP > > Mar 14 22:20:18 raspberrypi weewx[13193]: reportengine: Found > configuration file /etc/weewx/skins/Ftp/skin.conf for report FTP > > Mar 14 22:20:18 raspberrypi weewx[13193]: ftpgenerator: FTP upload not > requested. Skipped. > > Mar 14 22:20:18 raspberrypi weewx[13193]: reportengine: Running report > RSYNC > > Mar 14 22:20:18 raspberrypi weewx[13193]: reportengine: Found > configuration file /etc/weewx/skins/Rsync/skin.conf for report RSYNC > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.