On Tuesday, November 28, 2017 at 1:35:54 PM UTC+2, Andrew Milner wrote: > > Re vantage vue baud rate setting - from the manual: > > How to Display the Baud Rate To display the Baud Rate settings on a > Vantage Pro or Vantage Pro2 console, make sure the data logger is installed > and then continue using the following procedures: • Enter the console Setup > Mode by pressing and holding DONE, then pressing the (-) key. • Use the BAR > and DONE to scroll to the Baud Rate settings screen: > Use the up (+) and down (-) arrows to change the Baud Rate setting, if > needed. Press and hold DONE to return the console to the current weather > mode. • Use the fastest Baud Rate your computer can handle. 19200 is the > fastest Baud Rate available and is the default setting on the console. • > Press DONE when you have the correct Baud Rate on the console screen. > > > To display the Baud Rate settings on a Vantage Vue console, make sure the > data logger is installed and then continue using the following procedures: > • Enter the console Setup Mode by pressing and holding DONE, then pressing > the (-) key. > 8 > USB Hardware Installation > • Press BAR to get to the Baud Rate settings screen: > Use the up (+) and down (-) arrows to change the Baud Rate setting, if > needed. Press and hold DONE to return the console to the current weather > mode. • Use the fastest Baud Rate your computer can handle. 19200 is the > fastest Baud Rate available and is the default setting on the console. • > Press and hold DONE when you have the correct Baud Rate on the console > screen > Note: The data logger does not require a constant connection with a > computer to continue logging and storing data. Although the data logger > should remain connected to the console at all times, the data logger needs > to be connected to the computer only when data is being downloaded or when > the computer is actively using data from the data logger. The data logger > and console can be disconnected from the computer if they are placed in a > location where the data logger cable cannot reach. However, WeatherLink’s > bulletin, summary, or other real-time window displays are accessible only > if the data logger and console are connected to the computer. > > The Serial Baud Rate option does not appear in console with firmware version 4.18. The attachment console.jpg is console screen with 3.00 firmware installation.
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.