A silly question - but what is the manufacturing code for your console? I see the update to 4.18 is only for consoles with manufacturing code greater than MB. As the previous version seems to work it is probably best to take the matter up with Davis directly.
On Tuesday, 28 November 2017 14:03:49 UTC+2, Antony K. wrote: > On Tuesday, November 28, 2017 at 1:35:54 PM UTC+2, Andrew Milner wrote: >> >> Re vantage vue baud rate setting - from the manual: >> >> How to Display the Baud Rate To display the Baud Rate settings on a >> Vantage Pro or Vantage Pro2 console, make sure the data logger is installed >> and then continue using the following procedures: • Enter the console Setup >> Mode by pressing and holding DONE, then pressing the (-) key. • Use the BAR >> and DONE to scroll to the Baud Rate settings screen: >> Use the up (+) and down (-) arrows to change the Baud Rate setting, if >> needed. Press and hold DONE to return the console to the current weather >> mode. • Use the fastest Baud Rate your computer can handle. 19200 is the >> fastest Baud Rate available and is the default setting on the console. • >> Press DONE when you have the correct Baud Rate on the console screen. >> >> >> To display the Baud Rate settings on a Vantage Vue console, make sure the >> data logger is installed and then continue using the following procedures: >> • Enter the console Setup Mode by pressing and holding DONE, then pressing >> the (-) key. >> 8 >> USB Hardware Installation >> • Press BAR to get to the Baud Rate settings screen: >> Use the up (+) and down (-) arrows to change the Baud Rate setting, if >> needed. Press and hold DONE to return the console to the current weather >> mode. • Use the fastest Baud Rate your computer can handle. 19200 is the >> fastest Baud Rate available and is the default setting on the console. • >> Press and hold DONE when you have the correct Baud Rate on the console >> screen >> Note: The data logger does not require a constant connection with a >> computer to continue logging and storing data. Although the data logger >> should remain connected to the console at all times, the data logger needs >> to be connected to the computer only when data is being downloaded or when >> the computer is actively using data from the data logger. The data logger >> and console can be disconnected from the computer if they are placed in a >> location where the data logger cable cannot reach. However, WeatherLink’s >> bulletin, summary, or other real-time window displays are accessible only >> if the data logger and console are connected to the computer. >> >> The Serial Baud Rate option does not appear in console with firmware > version 4.18. > The attachment console.jpg is console screen with 3.00 firmware > installation. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
