I am looking to develop a driver for the Lufft WS601-UMB.  It seems most 
systems have a single, or a few different loop packets, each with multiple 
measurements/sensor output.  The Lufft does have a few buffers with 
multiple measurements, but even combining all of them does not necessarily 
provide the specific values one might want.  It can also provide individual 
values by channel, and has different channels for different units (i.e. 
there is a channel for temp in F and another for C).  It can use different 
protocols (UMB, MODBUS, etc), and as far as I can tell, will only output on 
request.  I am thinking that using the UMB protocol is desirable, as it 
provides the best ability to configure the station without the proprietary 
software (win only).

Is there an in-use driver that could provide a starting place for a channel 
by channel (value by value) driver, including station configuration?  I can 
get around in Python, but I am chemist, not a programmer.  A starting place 
would be helpful.

Some info on the Lufft, including user manual and UMB protocol (under 
resources tab towards bottom of the page):  
https://www.lufft.com/products/compact-weather-sensors-293/ws601-umb-smart-weather-sensor-1831/

Cheers,
Al

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to