With a very similar setup, here's what's in the sensor map section of my weewx.conf (changing my sensor ID number to yours):
rain = rainfall.00003420.* weeWX calculates the daily rain total. On Friday, May 25, 2018 at 11:51:43 AM UTC-4, bdf0506 wrote: > > I'm trying to properly map an Acurite 5x1 sensor to the configurations. I > am using the weewx interceptor as dns hijack mode, listening on port 8080. > So the sensor transmits to the SmartHUB, and then transmits to the server > that is running WeeWx. > > This is the sensor that I have: > https://www.acurite.com/5-in-1-weather-sensor-temperature-humidity-rainfall-wind-speed-wind-direction-vn1txca1-06004rm.html > > When I look at the rainfall in my raw logs that are being captured, I see > the following listed in the raw packet logs: > > 'rainfall.00003420.24C86EXXXXXX': 0.0 > 'rain_total.00003420.24C86EXXXXXX': 0.01 > > In WeeWx, where should these fields map to? I see by default my options > are "rainRate" and "rain", but what is the proper mapping? Perhaps I should > only map one field and let WeeWx calculate the rest? Any guidance is much > appreciated. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
