Hallo Gary ich muss dich nochmal stören. die Aktuelle Condition mit Wunderground und WD stimmen nicht Überein. Wunderground zeigt = Partly Cloudy und WD zeigt = cloudy da kann doch was nicht stimmen, Wunderground ist richtig. kannst du da nochmal drüber schauen..
cu. Kalli Am Freitag, 24. August 2018 16:41:40 UTC+2 schrieb gjr80: > > Hallo Kalli, > > Die aktuellen Bedingungen werden von WeatherUnderground in festen > Intervallen erhalten. Eine Standardinstallation verwendet ein > 30-Minuten-Intervall. Sie können dieses Intervall nach oben oder nach > unten ändern, auch wenn es keinen Sinn hat, es kürzer als Ihre > Senderarchivierungszeit zu haben. Um den Standardwert zu ändern, fügen > Sie in der Datei weewx.conf die Option conditions_interval config unter > [Weewx-WD] > [[Supplementary]] [[[WU]]] wie folgt hinzu: > > [Weewx-WD] > .... > .... > [[Supplementary]] > .... > .... > [[[WU]]] > .... > conditions_interval = xxx > > Wobei xxx das gewünschte Intervall in Sekunden ist (Standard ist 1800). Sie > müssen WeeWX neu laden oder neu starten, damit die Änderung wirksam wird. > Wenn > Sie im Logbuch des WeeWX-Startup genau hinsehen, sollten Sie einen Eintrag > sehen, der angibt, welche Intervalle verwendet werden (es gibt drei; > 'conditions', 'forecast' und 'almanac'). > > Eine Sache, die wir im Hinterkopf behalten sollten, ist letztendlich, dass > WeatherUnderground weiß, wie oft und auf welcher Basis sie ihre aktuellen > Daten aktualisieren. > > The current conditions are obtained from WeatherUnderground at fixed > intervals. A default install uses a 30 minute interval. You can change this > interval up or down, though there is no point having it any shorter than > your station archive period. To change the default add a > conditions_interval config option under [Weewx-WD] [[Supplementary]] > [[[WU]]] in weewx.conf as follows: > > [Weewx-WD] > .... > .... > [[Supplementary]] > .... > .... > [[[WU]]] > .... > conditions_interval = xxx > > where xxx is the interval you want in seconds (default is 1800). You will > need to do a config reload or restart WeeWX for the change to take effect. > If you look carefully in the log at the WeeWX startup you should see an > entry that indicates what intervals are in use (there are three; > conditions, forecast and almanac). > > One thing to keep in mind, ultimately we are at the whim of > WeatherUnderground as to how often and on what basis they update their > current conditions data. > > > Gruß > > Gary > > On Friday, 24 August 2018 18:34:40 UTC+10, Kalli wrote: >> >> Hallo Gir80 >> ich habe festgestellt, das die Anzeige für das Aktuelle Wetter sehr lange >> dauert bis diese sich ändert. >> Von Sonne nach Regen dauert sehr lange oder ändert sich garnicht, da >> sollte noch mal was gemacht werden. >> denn wenn es Regnet sollte auch Aktuell: Regen da stehen. >> >> mfg. Kalli >> >> Am Donnerstag, 22. Februar 2018 22:07:13 UTC+1 schrieb Kalli: >>> >>> hallo >>> >>> ich benutze WD-Live >>> da wird aber leider die Mondphase nicht angezeigt. >>> muss da noch was eingesellt werden. >>> >>> >>> >>> Hello >>> >>> I use WD-Live >>> but unfortunately the moon phase is not displayed. >>> there must be something else set up. >>> >>> cu. Kalli >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.