ok...i will do. Now testing 4.4 kernel with x driver. El miércoles, 17 de octubre de 2018, 2:02:36 (UTC+2), Cameron D escribió: > > There is a possibilty we are looking at two separate problems related to > kernel version, but if it is the same cause then the libusb0 code hangs the > kernel, while the libusb1 code only causes the usb code to block access. > But is it only the wrm300 that is blocked, or all USB? > I think part of the next diagnostic steps should be... > when the system is running normally, take a snapshot with *lsusb* (assuming > it is available) > when wmr300 stops, try lsusb again > then plug in something else to the usb port and see what lsusb reports. > Perhaps a usb memory stick would be an obvious choice > > > On Wednesday, 17 October 2018 01:20:43 UTC+10, Ruben Navarro Huedo wrote: >> >> 1 Yes >> 2 Yes with no result. >> 3 Raspberry was perfectly running. I could ssh on it but impossible >> recover USB connection with WMR300 without rebooting. >> >> Testing now with 4.4.50 kernel. >> >> >> El martes, 16 de octubre de 2018, 5:10:03 (UTC+2), Cameron D escribió: >>> >>> Sad. >>> So the unresolved questions are: >>> >>> 1. was the wmr300 console still displaying the USB symbol after it >>> stopped? >>> 2. did you try unplug/reinsert the usb cable? >>> 3. was the kernel totally unresponsive - even after unplugging USB? >>> could you even ping it? >>> >>> Cameron. >>> >>> On Tuesday, 16 October 2018 05:30:21 UTC+10, Ruben Navarro Huedo wrote: >>>> >>>> bad news :-( >>>> After 7 days weewx lost connection with wmr300x and i had to reboot my >>>> raspberry. >>>> Going now to kernel 4.4 and driver wmr300x. >>>> >>>> >>>> El domingo, 14 de octubre de 2018, 16:47:44 (UTC+2), Ruben Navarro >>>> Huedo escribió: >>>>> >>>>> 6 days uptime using and going up: >>>>> >>>>> RASPBERRY PI ZERO W >>>>> WMR300 >>>>> KERNEL 4.14.70 >>>>> WMR300X DRIVER >>>>> WEEWX 3.8.2 >>>>> >>>>> This is my highest uptime with 4.14 kernel. >>>>> >>>>> >>>>> El sábado, 13 de octubre de 2018, 0:46:49 (UTC+2), Ruben Navarro Huedo >>>>> escribió: >>>>>> >>>>>> Testing wmr300x driver with kernel 4.14.70 >>>>>> >>>>>> 4 days uptime and going up. >>>>>> >>>>>> In my first attempt with this driver and 4.14 kernel I lost >>>>>> connection with the console 48 hours after starting. >>>>>> >>>>>> I don't know what changed since the first attempt. >>>>>> >>>>>> I continue testing... >>>>>> >>>>>>
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.