4 days uptime with wmr300x driver and kernel 4.4.50 Going up.
El miércoles, 17 de octubre de 2018, 18:06:45 (UTC+2), Ruben Navarro Huedo escribió: > > ok...i will do. > Now testing 4.4 kernel with x driver. > > El miércoles, 17 de octubre de 2018, 2:02:36 (UTC+2), Cameron D escribió: >> >> There is a possibilty we are looking at two separate problems related to >> kernel version, but if it is the same cause then the libusb0 code hangs the >> kernel, while the libusb1 code only causes the usb code to block access. >> But is it only the wrm300 that is blocked, or all USB? >> I think part of the next diagnostic steps should be... >> when the system is running normally, take a snapshot with *lsusb* (assuming >> it is available) >> when wmr300 stops, try lsusb again >> then plug in something else to the usb port and see what lsusb reports. >> Perhaps a usb memory stick would be an obvious choice >> >> >> On Wednesday, 17 October 2018 01:20:43 UTC+10, Ruben Navarro Huedo wrote: >>> >>> 1 Yes >>> 2 Yes with no result. >>> 3 Raspberry was perfectly running. I could ssh on it but impossible >>> recover USB connection with WMR300 without rebooting. >>> >>> Testing now with 4.4.50 kernel. >>> >>> >>> El martes, 16 de octubre de 2018, 5:10:03 (UTC+2), Cameron D escribió: >>>> >>>> Sad. >>>> So the unresolved questions are: >>>> >>>> 1. was the wmr300 console still displaying the USB symbol after it >>>> stopped? >>>> 2. did you try unplug/reinsert the usb cable? >>>> 3. was the kernel totally unresponsive - even after unplugging >>>> USB? could you even ping it? >>>> >>>> Cameron. >>>> >>>> On Tuesday, 16 October 2018 05:30:21 UTC+10, Ruben Navarro Huedo wrote: >>>>> >>>>> bad news :-( >>>>> After 7 days weewx lost connection with wmr300x and i had to reboot my >>>>> raspberry. >>>>> Going now to kernel 4.4 and driver wmr300x. >>>>> >>>>> >>>>> El domingo, 14 de octubre de 2018, 16:47:44 (UTC+2), Ruben Navarro >>>>> Huedo escribió: >>>>>> >>>>>> 6 days uptime using and going up: >>>>>> >>>>>> RASPBERRY PI ZERO W >>>>>> WMR300 >>>>>> KERNEL 4.14.70 >>>>>> WMR300X DRIVER >>>>>> WEEWX 3.8.2 >>>>>> >>>>>> This is my highest uptime with 4.14 kernel. >>>>>> >>>>>> >>>>>> El sábado, 13 de octubre de 2018, 0:46:49 (UTC+2), Ruben Navarro >>>>>> Huedo escribió: >>>>>>> >>>>>>> Testing wmr300x driver with kernel 4.14.70 >>>>>>> >>>>>>> 4 days uptime and going up. >>>>>>> >>>>>>> In my first attempt with this driver and 4.14 kernel I lost >>>>>>> connection with the console 48 hours after starting. >>>>>>> >>>>>>> I don't know what changed since the first attempt. >>>>>>> >>>>>>> I continue testing... >>>>>>> >>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.