Thanks for the advise. I did turn off power and remove batteries prior to my e-mail to you. After your post I again powered off and removed batteries and WAITED a little longer. After reinserting batteries and powering up things are now working. Thanks again. Dick
On Monday, October 15, 2018 at 11:53:14 AM UTC-7, dhamp...@gmail.com wrote: > > I have a Davis Vantage Pro 2 system. Originally on Windows 10 working no > problem. I have thrown out Windows and did a clean install of Ubuntu 18.04 > Mate. I installed weewx v3.8.2 per instructions from 'weeWX: Installation > on Debian-base systems" i.e apt-get install weewx. I also installed Python > 2.1.15. I set up weewx.conf for Davis Weatherlink Data Logger > (6510USB)....'Vantge'. I used ttyUSB0. On starting system it generated html > files but almost all the data is missing. I reset and cleaned out data on > data logger (removed batteries etc.) I then restarted everything. Same > problem on data. I tested to see if Ubuntu was looking at ttyUSB0. As far > as I could tell it was talking to ttyUSB0. Ihave been trying things for > about one week but am unable to see what is wrong. Any suggestions on what > to try next is appreciated. > > Dick Hampikian > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
