Hello Massimiliano, , Thank you for you feedback. I have a spare Raspberry Pi 3 which I can utilise. I will set it up this evening with the version of Linux you are using, If you can guide me from that, I will be very pleased.
Regards, Ian On Fri, Nov 30, 2018 at 2:20 PM Massimiliano Neri <icnmfa...@gmail.com> wrote: > Hello Steep... > > I am testing myself to make it work, and I managed to do it even if I have to > refine the iptables to make the installation cleaner. > The bridge of this weather station does not have a built-in webserver, so if > you do a port scanner I would not find any available port anymore you have to > connect it via wifi to the router and it does not have an ethernet connector. > However, no fear, it is more difficult to configure it with weewx than other > weather stations, but it works well once connected with this software. > The IPTABLES rules listed by Tanwe are important to make it work, the port 80 > you see in the rule is an interception that directs on another port that you > choose and that is available to do the iptables. > I personally am configuring the weewx software with the interceptor driver, > directly on an Orange Pi Zero for $ 10. > Orange Pi Zero has Ubuntu's Bionic image installed, and I've set up the small > mini PC to serve as a HotSpot, and then connect the WH-2650 bridge directly > to the Orange. > So in my case the bridge does not connect to the home router but to the mini > PC where weewx also runs, and only the Orange Pi is connected to the router > via ethernet cable. > I created thanks to Tanwe's information on the routes of the iptables and the > station works, but as I mentioned you are to refine, in fact if I use the app > of the smartphone that is connected to the Orange via wifi, the app itself > can not find the bridge device. Of course, the station was connected to the > hotspot before I made the rules. > Apart from this detail, everything seems to work, so if you need information, > I can tell you where you came from the configuration. > > > Il giorno venerdì 23 novembre 2018 00:11:49 UTC+1, Massimiliano Neri ha > scritto: >> >> Hi, I just bought a WaldBeck Halley WH-2650, basically a clone of the >> WH-2650 Fine Offset, can you tell me how to configure weewx.conf to >> intercept its data string? >> >> I thank you in advance. >> > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.