weewx.conf attached - passwords etc changed. On Tuesday, 5 March 2019 22:07:12 UTC+13, gjr80 wrote: > > Sorry I am a bit slow in this but I don't use ftp myself. I see files are > being uploaded from /public_html, just wondering if perhaps something is in > the wrong place. Can you post a copy of weewx.conf being careful to take > out any sensitive info, user names, passwords etc. > > Gary >
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
# WEEWX CONFIGURATION FILE # # Copyright (c) 2009-2015 Tom Keffer <tkef...@gmail.com> # See the file LICENSE.txt for your rights. ############################################################################## # This section is for general configuration information. # Set to 1 for extra debug info, otherwise comment it out or set to zero debug = 1 # Root directory of the weewx data file hierarchy for this station WEEWX_ROOT = / # Whether to log successful operations log_success = True # Whether to log unsuccessful operations log_failure = True # How long to wait before timing out a socket (FTP, HTTP) connection socket_timeout = 20 # Do not modify this. It is used when installing and updating weewx. version = 3.9.1 ############################################################################## # This section is for information about the station. [Station] # Description of the station location location = "Wilson Bay, Queenstown, NZ" # Latitude and longitude in decimal degrees latitude = -45.0595 longitude = 168.567 # Altitude of the station, with unit it is in. This is downloaded from # from the station if the hardware supports it. altitude = 320, meter # Set to type of station hardware. There must be a corresponding stanza # in this file with a 'driver' parameter indicating the driver to be used. station_type = Vantage # If you have a website, you may specify an URL #station_url = http://www.example.com # The start of the rain year (1=January; 10=October, etc.). This is # downloaded from the station if the hardware supports it. rain_year_start = 1 # Start of week (0=Monday, 6=Sunday) week_start = 6 ############################################################################## [Vantage] # This section is for the Davis Vantage series of weather stations. # Connection type: serial or ethernet # serial (the classic VantagePro) # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) type = serial # If the connection type is serial, a port must be specified: # Debian, Ubuntu, Redhat, Fedora, and SuSE: # /dev/ttyUSB0 is a common USB port name # /dev/ttyS0 is a common serial port name # BSD: # /dev/cuaU0 is a common serial port name port = /dev/ttyUSB0 # If the connection type is ethernet, an IP Address/hostname is required: host = 1.2.3.4 ###################################################### # The rest of this section rarely needs any attention. # You can safely leave it "as is." ###################################################### # Serial baud rate (usually 19200) baudrate = 19200 # TCP port (when using the WeatherLinkIP) tcp_port = 22222 # TCP send delay (when using the WeatherLinkIP): tcp_send_delay = 0.5 # The id of your ISS station (usually 1). If you use a wind meter connected # to a anemometer transmitter kit, use its id iss_id = 1 # How long to wait for a response from the station before giving up (in # seconds; must be greater than 2) timeout = 4 # How long to wait before trying again (in seconds) wait_before_retry = 1.2 # How many times to try before giving up: max_tries = 4 # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 model_type = 2 # The driver to use: driver = weewx.drivers.vantage ############################################################################## # This section is for uploading data to Internet sites [StdRESTful] [[StationRegistry]] # To register this weather station with weewx, set this to true register_this_station = false [[AWEKAS]] # This section is for configuring posts to AWEKAS. # If you wish to do this, set the option 'enable' to true, # and specify a username and password. # To guard against parsing errors, put the password in quotes. enable = false username = replace_me password = replace_me [[CWOP]] # This section is for configuring posts to CWOP. # If you wish to do this, set the option 'enable' to true, # and specify the station ID (e.g., CW1234). enable = false station = replace_me # If this is an APRS (radio amateur) station, uncomment # the following and replace with a passcode (e.g., 12345). #passcode = replace_me (APRS stations only) [[PWSweather]] # This section is for configuring posts to PWSweather.com. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. # To guard against parsing errors, put the password in quotes. enable = false station = replace_me password = replace_me [[WOW]] # This section is for configuring posts to WOW. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. # To guard against parsing errors, put the password in quotes. enable = false station = replace_me password = replace_me [[Wunderground]] # This section is for configuring posts to the Weather Underground. # If you wish to do this, set the option 'enable' to true, # and specify a station (e.g., 'KORHOODR3') and password. # To guard against parsing errors, put the password in quotes. enable = true station = IOTAGOQU2 password = 1234567890 # Set the following to True to have weewx use the WU "Rapidfire" # protocol. Not all hardware can support it. See the User's Guide. rapidfire = False ############################################################################## # This section specifies what reports, using which skins, to generate. [StdReport] # Where the skins reside, relative to WEEWX_ROOT SKIN_ROOT = /etc/weewx/skins # Where the generated reports should go, relative to WEEWX_ROOT HTML_ROOT = /var/www/html/weewx # The database binding indicates which data should be used in reports. data_binding = wx_binding #### # Each of the following subsections defines a report that will be run. # See the customizing guide to change the units, plot types and line # colors, modify the fonts, display additional sensor data, and other # customizations. Many of those changes can be made here by overriding # parameters, or by modifying templates within the skin itself. [[StandardReport]] # See the customizing guide to change the units, plot types and line # colors, modify the fonts, display additional sensor data, and other # customizations. Many of those changes can be made here by overriding # parameters, or by modifying templates within the skin itself. # The StandardReport uses the 'Standard' skin, which contains the # images, templates and plots for the report. skin = Standard enable = True [[[Units]]] [[[[Groups]]]] group_altitude = meter group_speed2 = km_per_hour group_pressure = hPa group_rain = mm group_rainrate = mm_per_hour group_temperature = degree_C group_degree_day = degree_C_day group_speed = km_per_hour [[[CheetahGenerator]]] search_list_extensions = user.xstats.ExtendedStatistics [[xstats]] HTML_ROOT = /var/www/html/weewx/xstats skin = xstats [[SeasonsReport]] # The SeasonsReport uses the 'Seasons' skin, which contains the # images, templates and plots for the report. skin = Seasons enable = false [[SmartphoneReport]] # The SmartphoneReport uses the 'Smartphone' skin, and the images and # files are placed in a dedicated subdirectory. skin = Smartphone enable = false HTML_ROOT = public_html/smartphone [[MobileReport]] # The MobileReport uses the 'Mobile' skin, and the images and files # are placed in a dedicated subdirectory. skin = Mobile enable = false HTML_ROOT = public_html/mobile [[FTP]] # FTP'ing the results to a webserver is treated as just another report, # albeit one with an unusual report generator! skin = Ftp # If you wish to use FTP, uncomment and fill out the next four lines. # Use quotes around passwords to guard against parsing errors. user = 576982968j*^%&^__ password = drowssap987654321 server = 43.245.53.39 path = /public_html # Set to True for an FTP over TLS (FTPS) connection. Not all servers # support this. secure_ftp = False # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = /var/www/html/weewx # Most FTP servers use port 21 port = 21 # Set to 1 to use passive mode, zero for active mode passive = 1 [[RSYNC]] # rsync'ing to a webserver is treated as just another report skin = Rsync # If you wish to use rsync, you must configure passwordless ssh using # public/private key authentication from the user account that weewx # runs as to the user account on the remote machine where the files # will be copied. # # The server, user, and path determine where files will be sent. # The server is the server name, such as www.threefools.org # The user is the username, such as weewx # The path is the destination directory, such as /var/www/html/weather # Be sure that the user has write permissions on the destination! #server = replace_me #user = replace_me #path = replace_me # Rsync can be configured to remove files from the remote server if # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you # make a mistake in the remote path, you could could unintentionally # cause unrelated files to be deleted. Set to 1 to enable remote file # deletion, zero to allow files to accumulate remotely. delete = 0 #### # Various options for customizing your reports. [[Defaults]] # The following section determines the selection and formatting of units. [[[Units]]] # The following section sets what unit to use for each unit group. # NB: The unit is always in the singular. I.e., 'mile_per_hour', # NOT 'miles_per_hour' [[[[Groups]]]] group_altitude = foot # Options are 'foot' or 'meter' group_degree_day = degree_F_day # Options are 'degree_F_day' or 'degree_C_day' group_pressure = inHg # Options are 'inHg', 'mmHg', 'mbar', or 'hPa' group_rain = inch # Options are 'inch', 'cm', or 'mm' group_rainrate = inch_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' group_speed = mile_per_hour # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' group_speed2 = mile_per_hour2 # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' group_temperature = degree_F # Options are 'degree_F' or 'degree_C' # The following section sets the formatting for each type of unit. [[[[StringFormats]]]] centibar = %.0f cm = %.2f cm_per_hour = %.2f degree_C = %.1f degree_F = %.1f degree_compass = %.0f foot = %.0f hPa = %.1f hour = %.1f inHg = %.3f inch = %.2f inch_per_hour = %.2f km_per_hour = %.0f km_per_hour2 = %.1f knot = %.0f knot2 = %.1f mbar = %.1f meter = %.0f meter_per_second = %.1f meter_per_second2 = %.1f mile_per_hour = %.0f mile_per_hour2 = %.1f mm = %.1f mmHg = %.1f mm_per_hour = %.1f percent = %.0f second = %.0f uv_index = %.1f volt = %.1f watt_per_meter_squared = %.0f NONE = " N/A" # The following section sets the label to be used for each type of unit [[[[Labels]]]] day = " day", " days" hour = " hour", " hours" minute = " minute", " minutes" second = " second", " seconds" NONE = "" # The following section sets the format to be used for each time scale. # The values below will work in every locale, but they may not look # particularly attractive. See the Customization Guide for alternatives. [[[[TimeFormats]]]] hour = %H:%M day = %X week = %X (%A) month = %x %X year = %x %X rainyear = %x %X current = %x %X ephem_day = %X ephem_year = %x %X [[[[Ordinates]]]] # Ordinal directions. The last one should be for no wind direction directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW, N/A # The following section sets the base temperatures used for the # calculation of heating and cooling degree-days. [[[[[DegreeDays]]]]] # Base temperature for heating days, with unit: heating_base = 65, degree_F # Base temperature for cooling days, with unit: cooling_base = 65, degree_F # A trend takes a difference across a time period. The following # section sets the time period, and how big an error is allowed to # still be counted as the start or end of a period. [[[[[Trend]]]]] time_delta = 10800 # 3 hours time_grace = 300 # 5 minutes # The labels to be used for each observation type [[[Labels]]] # Set to hemisphere abbreviations suitable for your location: hemispheres = N, S, E, W # Formats to be used for latitude whole degrees, longitude whole # degrees, and minutes: latlon_formats = %02d, %03d, %05.2f # Generic labels, keyed by an observation type. [[[[Generic]]]] barometer = Barometer dewpoint = Dew Point ET = ET heatindex = Heat Index inHumidity = Inside Humidity inTemp = Inside Temperature outHumidity = Humidity outTemp = Outside Temperature radiation = Radiation rain = Rain rainRate = Rain Rate UV = UV Index windDir = Wind Direction windGust = Gust Speed windGustDir = Gust Direction windSpeed = Wind Speed windchill = Wind Chill windgustvec = Gust Vector windvec = Wind Vector extraTemp1 = Temperature1 extraTemp2 = Temperature2 extraTemp3 = Temperature3 # Sensor status indicators rxCheckPercent = Signal Quality txBatteryStatus = Transmitter Battery windBatteryStatus = Wind Battery rainBatteryStatus = Rain Battery outTempBatteryStatus = Outside Temperature Battery inTempBatteryStatus = Inside Temperature Battery consBatteryVoltage = Console Battery heatingVoltage = Heating Battery supplyVoltage = Supply Voltage referenceVoltage = Reference Voltage [[[Almanac]]] # The labels to be used for the phases of the moon: moon_phases = New, Waxing crescent, First quarter, Waxing gibbous, Full, Waning gibbous, Last quarter, Waning crescent ############################################################################## # This service acts as a filter, converting the unit system coming from # the hardware to a unit system in the database. [StdConvert] # The target_unit affects only the unit system in the database. Once # chosen it cannot be changed without converting the entire database. # Modification of target_unit after starting weewx will result in # corrupt data - the database will contain a mix of US and METRIC data. # # The value of target_unit does not affect the unit system for # reporting - reports can display US, Metric, or any combination of units. # # In most cases, target_unit should be left as the default: US # # In particular, those migrating from a standard wview installation # should use US since that is what the wview database contains. # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' ############################################################################## # This section can adjust data using calibration expressions. [StdCalibrate] [[Corrections]] # For each type, an arbitrary calibration expression can be given. # It should be in the units defined in the StdConvert section. # Example: foo = foo + 0.2 ############################################################################## # This section is for quality control checks. If units are not specified, # values must be in the units defined in the StdConvert section. [StdQC] [[MinMax]] barometer = 800, 1500, hPa outTemp = -40, 120, degree_C inTemp = -10, 120, degree_C outHumidity = 0, 100 inHumidity = 0, 100 windSpeed = 0, 120, km_per_hour pressure = 800, 1500, hPa ############################################################################## # This section controls the origin of derived values. [StdWXCalculate] [[Calculations]] # Derived quantities are calculated by this service. Possible values are: # hardware - use the value provided by hardware # software - use the value calculated by weewx # prefer_hardware - use value provide by hardware if available, # otherwise use value calculated by weewx pressure = prefer_hardware barometer = prefer_hardware altimeter = prefer_hardware windchill = prefer_hardware heatindex = prefer_hardware dewpoint = prefer_hardware inDewpoint = prefer_hardware rainRate = prefer_hardware ############################################################################## # For hardware that supports it, this section controls how often the # onboard clock gets updated. [StdTimeSynch] # How often to check the weather station clock for drift (in seconds) clock_check = 14400 # How much it can drift before we will correct it (in seconds) max_drift = 5 ############################################################################## # This section is for configuring the archive service. [StdArchive] # If the station hardware supports data logging then the archive interval # will be downloaded from the station. Otherwise, specify it (in seconds). archive_interval = 600 # If possible, new archive records are downloaded from the station # hardware. If the hardware does not support this, then new archive # records will be generated in software. # Set the following to "software" to force software record generation. record_generation = hardware # Whether to include LOOP data in hi/low statistics loop_hilo = True # The data binding used to save archive records data_binding = wx_binding ############################################################################## # This section binds a data store to a database. [DataBindings] [[wx_binding]] # The database must match one of the sections in [Databases]. # This is likely to be the only option you would want to change. database = archive_sqlite # The name of the table within the database table_name = archive # The manager handles aggregation of data for historical summaries manager = weewx.wxmanager.WXDaySummaryManager # The schema defines the structure of the database. # It is *only* used when the database is created. schema = schemas.wview.schema ############################################################################## # This section defines various databases. [Databases] # A SQLite database is simply a single file [[archive_sqlite]] database_type = SQLite database_name = weewx.sdb # MySQL [[archive_mysql]] database_type = MySQL database_name = weewx ############################################################################## # This section defines defaults for the different types of databases. [DatabaseTypes] # Defaults for SQLite databases [[SQLite]] driver = weedb.sqlite # Directory in which the database files are located SQLITE_ROOT = /var/lib/weewx # Defaults for MySQL databases [[MySQL]] driver = weedb.mysql # The host where the database is located host = localhost # The user name for logging in to the host user = weewx # The password for the user name (quotes guard against parsing errors) password = weewx ############################################################################## # This section configures the internal weewx engine. [Engine] [[Services]] # This section specifies the services that should be run. They are # grouped by type, and the order of services within each group # determines the order in which the services will be run. prep_services = weewx.engine.StdTimeSynch data_services = , process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate archive_services = weewx.engine.StdArchive restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS report_services = weewx.engine.StdPrint, weewx.engine.StdReport