Every once in a while my pi reboots (power) and so far I haven't had any problems with weewx getting the data from the Ultimeter 2100, after coming up on its own. I just now did a sudo reboot, and now, even after restarting / reloading / (several times) weewx, and removing-replugging the USB, I'm still getting Jun 21 17:05:56 RPI3 weewx[1430]: ultimeter: Failed attempt 5 of 5 to get readings: Une...013 Jun 21 17:05:59 RPI3 weewx[1430]: ultimeter: Max retries (5) exceeded for readings Jun 21 17:05:59 RPI3 weewx[1430]: engine: Caught WeeWxIOError: Max retries ( 5) exceeded...ngs Jun 21 17:05:59 RPI3 weewx[1430]: **** Waiting 60 seconds then retrying...
usb-devices (omitting the other devices) shows the adapter as device 6: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1 P: Vendor=050d ProdID=0109 Rev=01.02 S: Manufacturer=Staples USB to Adapter S: SerialNumber=324866 C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=mct_u232 Here is the output of lsusb & ls /dev/*USB* ls /dev/*USB* /dev/ttyUSB0 # lsusb Bus 001 Device 006: ID 050d:0109 Belkin Components F5U109/F5U409 PDA Adapter Bus 001 Device 004: ID 154b:009f PNY Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 F$ Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub # This Pi runs fine, for over a year now, until it decides to stop talking to the USB-serial adapter. I'm not sure if the update caused the problem, because often if I reboot the pi, the serial port and the ultimeter.py and the ultimeter just stop giving the right data. Sometimes a reboot does it, sometimes unplugging everything after powering down, the replugging fixes it, sometimes it depends upon the position your teeth are in. I'm seriously hoping you have sage troubleshooting advice I can use to fix this combination. I like Peet's (It is here in Germany at the house we're renting), and my Davis is back home, which works without a single problem for several years. This Peets w/ the serial-USB has been a headache. Thanks for your ideas -- "MP" -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/1e0ac2d0-bf14-4f3b-973e-a2c76de24659%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.