I also have the Access and am using sniff to feed data to weewx. I think some of the rain parameters get initialized the first time you get rain and the other errors can be ignored. Mine works fine other than a _very_ annoying problem wherein the Access just decides that it won't send any data to WeatherUnderground at all. This is confirmed by doing a tcpdump and seeing nothing coming out of the Access.
On Tuesday, July 30, 2019 at 3:41:05 PM UTC-4, Xant wrote: > > > Ok... I may have figured-out as the following: > > > 1) '*rain*' sensors in Acurite Atlas as acquired by Interceptor driver > > identifiers: {} > raw data: ID=KNYCLIFT14&PASSWORD=XXXX& > > softwaretype=myAcuRite&dateutc=now&action=updateraw&realtime=1&rtfreq=35&baromin=30.05&UV=0&humidity=78&tempf=75.1&windspeedmph=3&winddir=291&windgustmph=4&windgustdir=55&dewptf=67.8& > *dailyrainin*=0.06&*rainin*=0.06 > raw packet: {'wind_speed': 3.0, 'barometer': 30.05, 'wind_gust': 4.0, > 'dewpoint': 67.8, 'humidity_out': 78.0, 'uv': 0.0, '*rain*': None, > 'dateTime': 1564448985, 'temperature_out': 75.1, 'wind_dir': 291.0, ' > *rain_total*': 0.06, 'wind_gust_dir': 55.0, 'usUnits': 1} > mapped packet: {'barometer': 30.05, 'dewpoint': 67.8, 'outHumidity': 78.0, > 'UV': 0.0, '*rain*': None, 'dateTime': 1564448985, 'windDir': 291.0, > 'outTemp': 75.1, 'windSpeed': 3.0, 'windGust': 4.0, 'usUnits': 1, > 'windGustDir': 55.0} > > That is "dailyrainin", "rainin", "rain", "rain_total". Not exactly clear > which one is what, but may have info overlap. > > 2) "rainin" in Interceptor driver > Previous postings mention "rainin" error and not recognized, which was > puzzling some as "rainin" at Interceptor.py listed as 'IGNORED_LABELS'. > > That gave a hint from Developers that "rainin" might be overlap info, and > should be ignored. > While "rainin" in IGNORED_LABELS section, was still generating error... > and the reason is the IGNORED_LABELS shows twice in Interceptor.py (one > with "rainin", the other without "rainin"). > > IGNORED_LABELS = ['realtime', 'rtfreq', 'action', 'ID', > 'PASSWORD', 'dateutc', 'softwaretype'] > > IGNORED_LABELS = ['rainin', 'dewptf', 'realtime', 'rtfreq', > 'action', 'ID', 'PASSWORD', 'dateutc', 'updateraw', 'sensor', 'mt', 'id', > 'probe', 'check', 'water'] > > Once 'rainin' is added to the first IGNORED_LABEL instance, the msg error > is gone, while still may provide the correct Rain data correlation. > > Best, > Xant > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/15b3a1de-036d-4d8c-8d31-5c0c2ca6e219%40googlegroups.com.