I'm not sure what you're referring to. If you mean "debug", it's at the top of your weewx.conf file.
-tk On Sun, Aug 25, 2019 at 4:36 PM rstetson1 <rstets...@gmail.com> wrote: > Will look for that variable. It's not in the doc that I have. > > thanks > > rsl > > > > On the Road... maybe. Sent from my T-Mobile 4G LTE Device > > -------- Original message -------- > From: Andrew Milner <andrew.s.r.mil...@gmail.com> > Date: 8/25/19 1:35 PM (GMT-05:00) > To: weewx-user <weewx-user@googlegroups.com> > Subject: [weewx-user] Re: No Updates on new system > > Well you did not actually post for two archive intervals. Weewx usually > reads vantage loop data every few seconds and rec data according to the > archive interval specified in the console. this can be adjusted using > wee_device. the start up sequence usually gives the archive interval which > weewx will use (ie the console or as specified in weewx.conf) - but your > log file does not start from the beginning of the start up sequence. Data > is usually output once every archive interval to reports and/or WU, CWOP > etc. The fact that your CWOP is at 30 minute intervals makes me think that > the console is probably set taking records at 30 minute intervals. If you > want 5 minute intervals then you will need to idealy set console = > weewx.conf = 5 minute (300 seconds) interval. > > > > > On Sunday, 25 August 2019 20:22:21 UTC+3, Roy Lamberton wrote: >> >> The CWOP and PWS updated at 1200, 1230, & 1300, regardless of the time of >> the setting under CWOP in the .conf file. >> >> I'm not sure where you tell the system to generate the transmissions, but >> that is happening every 30 minutes at the top and bottom of the hour. >> >> Here is the log: >> roy@roy-STCK1A8LFC:/etc/weewx$ tail -f /var/log/syslog >> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: manager: Daily summary >> version is 2.0 >> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: message repeated 2 times: [ >> manager: Daily summary version is 2.0] >> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: engine: Clock error is -1.20 >> seconds (positive is fast) >> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: vantage: Getting archive >> packets since 2019-08-25 13:00:00 EDT (1566752400) >> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: vantage: Gentle wake up of >> console successful >> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: vantage: Retrieving 0 >> page(s); starting index= 0 >> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: engine: Starting main packet >> loop. >> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: vantage: Gentle wake up of >> console successful >> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: vantage: Requesting 200 LOOP >> packets. >> Aug 25 13:06:21 roy-STCK1A8LFC weewx[8075]: vantage: Gentle wake up of >> console successful >> Aug 25 13:07:30 roy-STCK1A8LFC wpa_supplicant[1179]: wlan1: >> CTRL-EVENT-SCAN-STARTED >> Aug 25 13:11:30 roy-STCK1A8LFC wpa_supplicant[1179]: message repeated 2 >> times: [ wlan1: CTRL-EVENT-SCAN-STARTED ] >> Aug 25 13:12:57 roy-STCK1A8LFC weewx[8075]: vantage: Requesting 200 LOOP >> packets. >> Aug 25 13:12:57 roy-STCK1A8LFC weewx[8075]: vantage: Gentle wake up of >> console successful >> Aug 25 13:13:30 roy-STCK1A8LFC wpa_supplicant[1179]: wlan1: >> CTRL-EVENT-SCAN-STARTED >> Aug 25 13:15:30 roy-STCK1A8LFC wpa_supplicant[1179]: wlan1: >> CTRL-EVENT-SCAN-STARTED >> Aug 25 13:17:01 roy-STCK1A8LFC CRON[8141]: (root) CMD ( cd / && >> run-parts --report /etc/cron.hourly) >> Aug 25 13:17:30 roy-STCK1A8LFC wpa_supplicant[1179]: wlan1: >> CTRL-EVENT-SCAN-STARTED >> >> It appears that WeeWx is asking the console for an update every 5 >> minutes, but then sits on the data until the top and bottom of the hour. >> Because of my location, CWOP always wanted a 5 minute reporting interval. >> So did Wunderground. >> >> I can't find anything that changes the time between reports that I >> haven't changed. >> >> >> On Sunday, August 25, 2019 at 1:05:35 PM UTC-4, Andrew Milner wrote: >>> >>> Posting the log from startup until two archive intervals have passed >>> would help analysing your problem. >>> >>> >>> >>> On Sunday, 25 August 2019 19:49:48 UTC+3, Roy Lamberton wrote: >>>> >>>> Update - it is posting the latest information every time I restart >>>> WeeWx, but then it asks for the LOOP Packets every 5 minutes, but doesn't >>>> process them. >>>> >>>> It almost seems like the software is getting the data but doesn't know >>>> what to do with it. >>>> >>>> I can't find anything in the Doc about the conf file that talks about >>>> timing of upload, except the Wunderground flash, which I turned off >>>> temporarily. >>>> >>>> But I need to talk with someone fast, or I'm going badcfk to my old >>>> Cumulus setup and putting WeeWx on hold. >>>> >>>> >>>> rsl >>>> On Sunday, August 25, 2019 at 12:19:43 PM UTC-4, Roy Lamberton wrote: >>>>> >>>>> OK, I have WeeWx running on an Ubuntu desktop PC and its connected and >>>>> appears to be working, but it isn't updating CWOP or any of the other >>>>> weather systems: >>>>> >>>>> Here's the syslog" >>>>> roy@roy-STCK1A8LFC:/etc/weewx$ tail -f /var/log/syslog >>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: manager: Daily summary >>>>> version is 2.0 >>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: message repeated 2 times: >>>>> [ manager: Daily summary version is 2.0] >>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: engine: Clock error is >>>>> -0.45 seconds (positive is fast) >>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: vantage: Getting archive >>>>> packets since 2019-08-25 12:00:00 EDT (1566748800) >>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: vantage: Gentle wake up of >>>>> console successful >>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: vantage: Retrieving 0 >>>>> page(s); starting index= 0 >>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: engine: Starting main >>>>> packet loop. >>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: vantage: Gentle wake up of >>>>> console successful >>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: vantage: Requesting 200 >>>>> LOOP packets. >>>>> Aug 25 12:05:20 roy-STCK1A8LFC weewx[7510]: vantage: Gentle wake up of >>>>> console successful >>>>> Aug 25 12:05:30 roy-STCK1A8LFC wpa_supplicant[1179]: wlan1: >>>>> CTRL-EVENT-SCAN-STARTED >>>>> >>>>> When I first ran it, the woftware download 2 months of data from the >>>>> console, and it did update one time when I restarted the software, but now >>>>> it doesn't seem to be updating CWOP or the web page on the PC. >>>>> >>>>> ??? >>>>> >>>>> rsl >>>>> >>>>> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/eafc3a4d-8125-4af4-9256-3f21ac2ce293%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/eafc3a4d-8125-4af4-9256-3f21ac2ce293%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/5d62cf5d.1c69fb81.79422.2831%40mx.google.com > <https://groups.google.com/d/msgid/weewx-user/5d62cf5d.1c69fb81.79422.2831%40mx.google.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEC%2BLGjjLsB5BHyN3%2Bs0hiRBpW-Cgb%3DJdTEA34N4owsYxg%40mail.gmail.com.
