Altitude is 2,320 ft. and the values are in the screen shot on the previous post. Did you see that?
On Thursday, February 13, 2020 at 7:16:11 PM UTC-8, Andrew Milner wrote: > > I give up - looks correct to me. > > have you run from the command line and seen the LOOP and REC data weewx is > receiving? > > what altitude is your station, and what values are you currently getting > for pressure, barometer and altimeter? > > On Thursday, 13 February 2020 22:10:08 UTC+2, Dan Blanchard wrote: >> >> I don't know, but that makes sense so I did it. I'm still not getting >> desired results though. >> >> On Thursday, February 13, 2020 at 9:38:55 AM UTC-8, Kevin Davis wrote: >>> >>> Do you need a space between your minus sign and the adjustment value? >>> >>> On Thu, Feb 13, 2020 at 9:32 AM Dan Blanchard <dan.z...@gmail.com> >>> wrote: >>> >>>> Hey Andrew, will you please look at the attached screen shots and let >>>> me know if this looks correct? >>>> >>>> Do I need to restart (sudo /etc/init.d/weewx restart) after I make >>>> these changes? I have and the changes don't seem to be taking effect. Is >>>> there something else I need to do? >>>> >>>> With regard to the barometer and altimeter having the same settings; I >>>> have probably misled. They are not exactly the same but they were >>>> relatively close to each other compared to the pressure value. Here are >>>> the current readings as of now when I run sudo weewxd >>>> /etc/weewx/weewx.conf. >>>> >>>> pressure: 29.98 >>>> altimeter: 32.57 >>>> barometer: 32.74 >>>> >>>> >>>> >>>> On Thursday, February 13, 2020 at 12:07:50 AM UTC-8, Andrew Milner >>>> wrote: >>>>> >>>>> If you have a LaCrosse WS28xx station then according to the hardware >>>>> guide the station outputs PRESSURE in weewx terminology - regardless of >>>>> what LaCrosse call it - and weewx should calculate barometer and >>>>> altimeter >>>>> settings. >>>>> >>>>> If pressure is incorrect then it can be adjusted as you specified - by >>>>> adjusting pressure (not barometer or altimeter) >>>>> >>>>> Make sure pressure is set to use hardware and barometer and altimeter >>>>> are set to use software. >>>>> >>>>> I am surprised barometer and altimeter are the same values - have you >>>>> set the station's altitude in weewx.conf, and have you specified software >>>>> generation for the values? >>>>> >>>>> >>>>> >>>>> On Thursday, 13 February 2020 09:23:27 UTC+2, Dan Blanchard wrote: >>>>>> >>>>>> Andrew, are you suggesting that I make a 'correction' entry under >>>>>> [StdCalibrate] such as barometer = barometer -2.8 assuming that I am >>>>>> getting a pressure reading of 30.13 and Barometer and ALtitude readings >>>>>> of >>>>>> 32.93? >>>>>> >>>>>> (see attached screenshot) >>>>>> >>>>>> On Wednesday, February 12, 2020 at 7:42:08 PM UTC-8, Andrew Milner >>>>>> wrote: >>>>>>> >>>>>>> 1. use stdcalibrate section of weewx.conf >>>>>>> http://weewx.com/docs/usersguide.htm#StdCalibrate >>>>>>> 2. FO station = Fine Offset weather station >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Wednesday, 12 February 2020 22:15:48 UTC+2, Dan Blanchard wrote: >>>>>>>> >>>>>>>> Andrew, how do I calibrate the pressure in weewx? Also, what's a FO >>>>>>>> station? >>>>>>>> >>>>>>>> On Tuesday, February 11, 2020 at 8:01:08 PM UTC-8, Andrew Milner >>>>>>>> wrote: >>>>>>>>> >>>>>>>>> check that the absolute pressure is correct - I have had a FO >>>>>>>>> station which had a dodgy pressure sensor before now. Calibrating >>>>>>>>> pressure >>>>>>>>> in weewx solved it. >>>>>>>>> >>>>>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to weewx...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/08c79655-b1af-4134-9a2b-82a4f52f051f%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/08c79655-b1af-4134-9a2b-82a4f52f051f%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/04b48216-0d03-4616-b548-8bf18cce067d%40googlegroups.com.