Thank you Sent from my iPhone
> On Apr 13, 2020, at 6:41 PM, Thomas Keffer <tkef...@gmail.com> wrote: > > > The debug serial line you included is: > > Apr 12 17:53:05 raspberrypi weewx[5222]: ultimeter: station said: 21 21 30 30 > 35 46 30 30 33 32 30 32 32 39 46 46 46 46 32 37 30 34 30 32 46 37 30 33 41 30 > 2D 2D 2D 2D 30 30 36 36 30 33 46 35 30 30 44 41 30 30 30 30 0D 0A > > These are hexadecimal values coded in ASCII. The part for "long-term rain" is > highlighted. > > The ASCII values "46 46 46 46", is "F F F F", or hex 0xffff, or decimal > 65535. Scaled by 0.01" per count, that gives 655.35. > > I don't know why your Ultimeter is emitting 0xffff for total rain. Perhaps > Peet Bros can answer that? > > -tk > > >> On Sun, Apr 12, 2020 at 7:42 PM Scott Gray <sfg...@gmail.com> wrote: >> Gary, >> >> I have not found a solution, but I have taken the additional steps. Attached >> is the syslog after debug serial was enabled, a screenshot of the results of >> direct run of weewx, and a photo of the rain display of the station. >> >> The display is showing 2.23in total for the day. >> >> The direct run shows rain: 0.0 and rain_total:655.35 >> >> The debug serial shows the following returns from the station: >> >> Apr 12 17:53:05 raspberrypi weewx[5222]: ultimeter: station said: 21 21 30 >> 30 35 46 30 30 33 32 30 32 32 39 46 46 46 46 32 37 30 34 30 32 46 37 30 33 >> 41 30 2D 2D 2D 2D 30 30 36 36 30 33 46 35 30 30 44 41 30 30 30 30 0D 0A >> Apr 12 17:53:06 raspberrypi weewx[5222]: ultimeter: station said: 21 21 30 >> 30 35 46 30 30 33 32 30 32 32 39 46 46 46 46 32 37 30 34 30 32 46 37 30 33 >> 41 30 2D 2D 2D 2D 30 30 36 36 30 33 46 35 30 30 44 41 30 30 30 30 0D 0A >> Apr 12 17:53:07 raspberrypi weewx[5222]: ultimeter: station said: 21 21 30 >> 30 35 45 30 30 35 33 30 32 32 39 46 46 46 46 32 37 30 34 30 32 46 37 30 33 >> 41 30 2D 2D 2D 2D 30 30 36 36 30 33 46 35 30 30 44 41 30 30 30 30 0D 0A >> Apr 12 17:53:08 raspberrypi weewx[5222]: ultimeter: station said: 21 21 30 >> 30 35 45 30 30 35 33 30 32 32 39 46 46 46 46 32 37 30 34 30 32 46 37 30 33 >> 41 30 2D 2D 2D 2D 30 30 36 36 30 33 46 35 30 30 44 41 30 30 30 30 0D 0A >> >> I am goign to check with Peet to see if they have any clues, but the station >> is in the Data Logger mode, as it should be. I have not updated the station, >> and this was working earlier. I cannot say with certainty that it worked on >> version 3.9.2. It worked previously for a long period of time, but my >> raspbian os corrupted and I rebuilt the device and reinstalled. >> >> Would anything in the Ultimeter driver have changed in the latest build? >> >> >> >> >>> On Tuesday, March 10, 2020 at 9:21:05 PM UTC-5, gjr80 wrote: >>> Hi, >>> >>> I have no experience with the ultimeter so can offer no help with the >>> hardware. You mention an error in the log, do you mean this: >>> >>> Feb 27 07:05:17 raspberrypi weewx[11354]: ultimeter: Failed attempt 1 of 5 >>> to get readings: Unexpected buffer length 59 >>> >>> If so I don't believe it will be the cause, I only saw the failure on >>> attempt 1 of 5 to get the readings, on the face of it it woudl appear that >>> attempt 2 of 5 worked (or another fail wouls have been logged). >>> >>> About all I can suggest is enabling the serial debug option in the >>> ultimeter driver, that will log the raw data the driver obtains from your >>> station, not sure what that will show and it may take a bit of decoding. If >>> there is no rain data there then the driver won't be passing anything on to >>> WeeWX. To enable serial debug edit wewx.conf, locate the [Ultimeter] stanza >>> and add the option debug_serial = 1. It shoudl look something like: >>> >>> [Ultimeter] >>> >>> .... >>> debug_serial = 1 >>> .... >>> >>> Also make sure you keep debug = 1. Save weewx.conf and restart WeeWX. Have >>> a look at the log and see what data is being logged from your station? what >>> shows when its raining? >>> >>> You could also try running WeeWX directly when itis raining, that will show >>> you the loop and archive data that WeeWX is seeing, though if WeeWX is >>> notreporting any rain there may well be no rain data there. >>> >>> Gary >>> >>> >>>> On Wednesday, 11 March 2020 00:45:10 UTC+10, Scott Gray wrote: >>>> Is anyone able to offer any assistance? >>>> >>>>> On Friday, March 6, 2020 at 9:50:10 PM UTC-6, Scott Gray wrote: >>>>> I am running weewx 3.9.2 on a Raspberry Pi. I have a Peet Bro’s. >>>>> Ultimeter 2000. It has stopped sending, or weewx has stopped reporting my >>>>> rain data. It did show a while back, but then stopped reporting to >>>>> Wunderground. It is also not showing on local index.html page.it shows >>>>> all other data, temp, wind, barometric pressure, and humidity. >>>>> >>>>> The head unit shows rain totals for the day, for instance today .6 inch >>>>> >>>>> I have the Ultimeter set to send the data in “data logging” mode. >>>>> >>>>> Has anyone encountered this? Any suggestions for solutions or further >>>>> troubleshooting? >>>>> >>>>> I have been running in debug mode. I have attached some logs from a >>>>> period of time in which we did have rain and rain amount was shown on >>>>> weather station head unit. >>>>> >>>>> I do see an error in the log, unsure how to address or if it is the cause. >>>>> >>>>> Any assistance would be appreciated. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/b650dfa3-9151-42e0-a107-4781a59d596f%40googlegroups.com. > > -- > You received this message because you are subscribed to a topic in the Google > Groups "weewx-user" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/weewx-user/cKVU1Ot8Tz0/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/CAPq0zECy_k0fJ_v%3DXdT2xAkDhH2f6MSQuxso9dr3NjtBo8JgrQ%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/56EA7965-3F20-4B7D-88A4-27B2C6ACDA29%40gmail.com.