The field "rain" is the total amount of rain that fell during an archive interval. It is calculated as the difference in total rain between the beginning and end of the interval. So, if total_rain does not change, then the "rain" field will show zero.
Is there a way to "reset" your station? It's possible the total rain counter has simply overflowed and, instead of wrapping around, it just stays at 0xffff. -tk On Tue, Apr 14, 2020 at 10:29 PM <sfg...@gmail.com> wrote: > If I may ask one more question. > > Rain is showing 0.0 in the direct run but field 11 is today's rain total. > The value for that field in the serial debug is 30 30 44 41 or 0x00da or > 218 decimal (2.18) inches, yet WeeWx is reporting 0.0 > > > Sent from my iPhone > > > On Apr 13, 2020, at 6:41 PM, Thomas Keffer <tkef...@gmail.com> wrote: > > > > 46 46 46 46 > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/88BCE192-3DF6-46B1-ADEA-2E0CD5BDAF8F%40gmail.com > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEB4z%3DEf%3D735ZTQTdnKawPJ7SzzCc1PV3XC-tCtvyqNuLg%40mail.gmail.com.
