Gary, No need for apologies. I'm glad that I was able to spot these things. And in a small way, I feel like I'm helping improve it for everyone.
On Friday, July 24, 2020 at 8:44:57 AM UTC-5 gjr80 wrote: > My apologies all round Bill, a few typos and a wrong assumption about > package installs - have rewritten and simplfied the GitHub readmes this > afternoon. They should be correct now. Perhaps a bit late now but to run > the driver directly the following should work: > > $ PYTHONPATH=/usr/share/weewx python -m user.gw1000 --help > > When you used wee_config --reconfigure to reconfigure WeeWX to use the > driver it should have prompted you for the IP address, unfortunately I > included --no-prompt in the wee_config command and that left you with no > IP address set (in which case the driver uses the first GW1000 that > replies). You can run the following command and step through the prompts > until you are asked for an IP address and then enter the IP address of the > GW1000 you wish to use: > > $ wee_config --reconfigure --driver=user.gw1000 > > Alternatively you can just edit weewx.conf and add a line ip_address > under [GW1000]: > > [GW1000] > .... > ip_address = 1.2.3.4 > > Either way you will need to restart once you have set the IP address. > > Gary > > On Friday, 24 July 2020 13:02:17 UTC+10, Bill Arthur wrote: >> >> I couldn't get it to run from the command line. >> When I did python -m user.gw1000 --help >> I get /usr/bin/python: No module named user.gw1000 >> >> But I have it up and running, everything looks good on my Seasons page. >> I'll give the data a closer look tomorrow. >> >> But I'm scratching my head trying to find how to specify the IP address >> in weewx.conf >> I have three GW1000s here, I have no idea which one is being used >> On Thursday, July 23, 2020 at 9:06:47 PM UTC-5 Bill Arthur wrote: >> >>> This link works: >>> https://github.com/gjr80/weewx-gw1000/releases/download/v0.1.0b4/gw1000-0.1.0b4.tar.gz >>> >>> On Thursday, July 23, 2020 at 8:57:49 PM UTC-5 Bill Arthur wrote: >>> >>>> FYI: >>>> wget -P /var/tmp >>>> https://github.com/gjr80/weewx-gw1000/releases/download/v0.1.0b4/weewx-gw1000-0.1.0b4.tar.gz >>>> >>>> gives me an Error 404 >>>> >>>> On Thursday, July 23, 2020 at 3:22:07 PM UTC-5 galfert wrote: >>>> >>>>> There is a thread in the developer section where some questions were >>>>> asked that were not directly related to development. This thread is good. >>>>> I'm just inviting people to ask their questions here in this thread >>>>> rather >>>>> than in the developer section. >>>>> >>>>> >>>>> On Thursday, July 23, 2020 at 2:56:51 PM UTC-4, steeple ian wrote: >>>>> >>>>>> ??? >>>>>> >>>>>> On Thu, 23 Jul 2020 at 19:39, galfert <gal...@gmail.com> wrote: >>>>>> >>>>> For anyone discussing this new GW1000 API driver in the WeeWX >>>>>>> development section STOP. Use this user section instead to discuss its >>>>>>> use. >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "weewx-user" group. >>>>>>> >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to weewx...@googlegroups.com. >>>>>> >>>>>> >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/91d513a8-cf9a-4cf2-8e16-261a02b67bebo%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/weewx-user/91d513a8-cf9a-4cf2-8e16-261a02b67bebo%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/659a01a4-0fb0-4100-aa5c-c53c7342cfb3n%40googlegroups.com.