User norecord has made changes to wxMesh so that it should work with python 3 and weewx 4.x. I have merged in their changes and pushed it to the master branch.
I've also changed my implementation so that the data is in JSON format. I'll likely push that up too, but need to make the switch to python3 first. On Saturday, July 11, 2020 at 8:55:07 a.m. UTC-3 morr...@gmail.com wrote: > Sorry for the late reply. I don't have much time to work on my original > wxMesh driver. > > From what I have seen of MQTTSubscribe, it's a much more complete > implementation of an MQTT subscriber, and offers the features I was > planning on adding some day. When I get a chance, I plan on switching to > using MQTTSubscribe. > > > > On Wednesday, 24 June 2020 18:00:44 UTC-3, Rich Bell wrote: >> >> Great to hear. Just give a shout if you run into any other difficulties. >> rich >> >> On Wednesday, 24 June 2020 16:50:26 UTC-4, Christian Peters wrote: >>> >>> Hi Rich, >>> >>> thank you very much. >>> It works like a charm! :-) >>> >>> I set up a temporary mapping to values already available in the databae. >>> For the temp and humid values it works out of the box, for CPM, CPS and >>> radiation I have to setup unit groups later. >>> >>> This is my working setup - just to have that written down for others: >>> >>> my data form the MQTT broker: >>> >>> >>> radiation:0.17,cpm:31,cps:0,temp_2m:25.97,temp_5cm:27.24,temp_dht22:34.30,hum_dht22:45.30,rain:0.00 >>> >>> weewx.conf: >>> >>> [MQTTSubscribeService] >>> host = xxx.xxx.xxx.xxx # IP of the broker >>> payload_type = keyword >>> console = True >>> [[topics]] >>> [[[weather]]] # The topic you are subscribing to >>> unit_system = METRICWX # Not sure weather you want METRICWX or >>> METRIC. See http://weewx.com/docs/customizing.htm#units >>> [[[[temp_2m]]]] # Name in the MQTT message >>> name = extraTemp1 # WeeWX name >>> [[[[temp_5cm]]]] >>> name = extraTemp2 >>> [[[[temp_dht22]]]] >>> name = extraTemp3 >>> [[[[hum_dht22]]]] >>> name = extraHumid3 >>> [[[[rain]]]] >>> name = hail >>> [[[[radiation]]]] >>> name = signal1 >>> [[[[cpm]]]] >>> name = signal2 >>> [[[[cps]]]] >>> name = signal3 >>> >>> [[message_callback]] >>> type = keyword >>> keyword_delimiter = "," # The delimiter between the name/value pairs >>> keyword_separator = ":" # The separator between the name and the value >>> >>> [[Services]] >>> data_services = user.MQTTSubscribe.MQTTSubscribeService >>> >>> That's quite nice and more elegant as to set up a second weewx instance >>> with a MQTT driver! >>> Thank you very much. >>> >>> My MQTT broker runs on a BananaPi which is located in the garden near >>> the sensors (Temp2m, Temp5cm, raingauge, temp and hum sensor inside the >>> controlbox and a MightyOhm Geiger Counter Kit). >>> I can't figure out why...but somtimes I lost the WLAN connection (after >>> 7-30 days). Then I restart the BananPi, start the mosquitto deamon...but >>> the weewx instance running the wxMesh driver didn't reconnect. >>> I have to start and stop this instance, then it works again. But I saw a >>> post in weewx-development that someone pointed out the connection was setup >>> once at initialisation...maybe there is no check of the connection and a >>> reconnect condition? >>> >>> If the setup goes online (at the moment I run the simulator whil >>> mograting all sensors and tweak the new webpage) and the VanatgeVP2 is >>> connected, I will check the behavior of your drriver in my setup. >>> >>> Thanks again for the excellent support. If I run into some problems I >>> will contact you again. :-) >>> >>> Regards, >>> >>> Christian >>> >>> P.S. Ken, thanks for you fix...it works..! :-) But the >>> MQTTSubscribeService works great and I will prefer to run only one weewx >>> instance to deal with all sensors. >>> >>> >>> Am Mittwoch, 24. Juni 2020 19:25:05 UTC+2 schrieb Rich Bell: >>>> >>>> >>>> Well, I haven't heard of having to restart WeeWX when the connection is >>>> lost, and if that happens I would certainly want to look into fixing that. >>>> I'll do some experiments to see if I can recreate. >>>> >>>> Sounds like picking the service might be the best long term choice, >>>> with the caveat about the reconnect logic needing to be verified. But if >>>> you want to get your feet wet, I would suggest that we get it up and >>>> running as a driver - perhaps even running from the command line for a >>>> bit. >>>> The actual configuration work is really the same. So you could migrate to >>>> the service as you get more comfortable or after we prove that lost >>>> connections are not a problem. >>>> >>>> The following assumes that you install 1.5.4-rc01. This changed the way >>>> to configure MQTTSubscribe. Once installed, there will be three key >>>> sections the [MQTTSubscribeDriver]/[MQTTSubscribeService] section. This is >>>> the MQTT connection information, and I believe this is pretty straight >>>> forward. But after looking at it, if you have questions let me know. >>>> >>>> Next up is the [[topics]] section. Based on the information you posted, >>>> I think this is what you would want >>>> >>>> [[topics]] >>>> [[[weather]]] # The topic you are subscribing to >>>> unit_system = METRICWX # Not sure weather you want METRICWX or >>>> METRIC. See http://weewx.com/docs/customizing.htm#units >>>> [[[[temp_2m]]]] # Name in the MQTT message >>>> name = extraTemp1 # WeeWX name >>>> [[[[temp_5cm]]]] >>>> name = extraTemp2 >>>> [[[[temp_dht22]]]] >>>> name = inTemp >>>> [[[[hum_dht22]]]] >>>> name = inHumidity >>>> [[[[rain]]]] >>>> name = rain >>>> [[[[geiger]]]] >>>> name = radiation >>>> >>>> Not sure about your TIME field and the value of 0. I left it out and >>>> since it is missing MQTTSubscribe will use the date/time from the server >>>> it >>>> is running on. There are other options for converting the incoming data, >>>> but yours looks pretty straight forward. >>>> >>>> Last is the [[message_callback]] section. I would call your data >>>> 'keyword'. If it was json, I would expect quotes around the fieldnames. >>>> So, >>>> something like this >>>> >>>> [[message_callback]] >>>> type = keyword >>>> keyword_delimiter = "," # The delimiter between the name/value pairs >>>> keyword_separator = ":" # The separator between the name and the value >>>> >>>> There are some additional options when running as a service to attempt >>>> to only process data that belongs to the loop packet or archive record >>>> that >>>> is being augmented. Over time I have found the defaults to be a bit too >>>> restrictive, so we might need to configure those a bit. >>>> >>>> I haven't tried to run a second instance of WeeWX, so I can't help >>>> there. But, if you need any more help with MQTTSubscribe, just let me know. >>>> -rich >>>> >>>> On Wednesday, 24 June 2020 12:51:43 UTC-4, Christian Peters wrote: >>>>> >>>>> Rich, >>>>> >>>>> that's great. I'm not sure whether I should stay on the driver version >>>>> or switch to the service version....which could make it maybe more easy. >>>>> But if the MQTTSubscribe as service lost connection and wouldn't >>>>> reconnect I have to restart the main weewx prog to get it up again!? So >>>>> maybe a second running instance >>>>> with MQTTSubscribe is the better choice...? >>>>> Difficult...I would perfer one instance as I struggle to get a second >>>>> weewx instance up with systemd at the moment.... >>>>> >>>>> So with mosquitto_sub -h 192.168.1.143 -t weather >>>>> >>>>> I got this ( in JSON format I think) : >>>>> >>>>> >>>>> TIME:0,radiation:0.17,cpm:31,cps:0,temp_2m:25.97,temp_5cm:27.24,temp_dht22:34.30,hum_dht22:45.30,rain:0.00 >>>>> >>>>> I mapped in my Python 2 env (weewx2.9, second instance with sql >>>>> databse) and wxMesh: >>>>> >>>>> [[label_map]] >>>>> TIME = dateTime >>>>> temp_2m = extraTemp1 >>>>> temp_5cm = extraTemp2 >>>>> temp_dht22 = inTemp >>>>> hum_dht22 = inHumidity >>>>> rain = rain >>>>> geiger = radiation >>>>> >>>>> So do you know the syntax for the mapping for MQTTSubscribe? >>>>> >>>>> As I send the data to the MQTT broker by myself it would be maybe best >>>>> to use a second instance and tweak the mapping to entrys which are >>>>> already >>>>> in the schema. >>>>> So I could stay in the mapping posted above? >>>>> >>>>> Do you set up a second instance of weewx with systemd already...? >>>>> Any help or syntax examples would be welcome, especially for the >>>>> format of the label mapping of >>>>> MQTTSubscribe. I tried weew-multi but dont get the second instance >>>>> up... Not sure its systemd ready... >>>>> >>>>> Thanks in advance, >>>>> >>>>> Christian >>>>> >>>>> >>>>> >>>>> Am Mittwoch, 24. Juni 2020 16:12:12 UTC+2 schrieb Rich Bell: >>>>>> >>>>>> Christian, >>>>>> >>>>>> MQTTSubscribe should be able to meet your needs. I know the >>>>>> documentation is a bit sparse, but I can help get you up and running. >>>>>> >>>>>> The first question you need to answer is whether to run as a service >>>>>> or driver? From what I am understanding. If you ran as a driver it would >>>>>> essentially be a replacement for wxmesh. Meaning it would the database >>>>>> configured for that WeeWX instance. If you ran MQTTSubscribe as a >>>>>> service, >>>>>> you could augment the data in your other WeeWX instance. >>>>>> >>>>>> The next question is the format of the incoming data. Is it json, >>>>>> keyword (name=value), or individual (single observation per topic)? >>>>>> Lastly, >>>>>> what name mapping do you need to? >>>>>> >>>>>> -rich >>>>>> >>>>>> On Wednesday, 24 June 2020 08:59:25 UTC-4, Christian Peters wrote: >>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> I ran a weewx 3.9. station with Python 2 and a seperate weewx >>>>>>> instance with the wxMesh.py driver. >>>>>>> This works very nice (as far as the broker isn't down or the >>>>>>> connection breaks - then a restart of the weewx instance which holds >>>>>>> the >>>>>>> wxMesh driver is needed...!). >>>>>>> As I now switch to Python 3 and weewx 4.x I figured out that the >>>>>>> wxMesh.py driver isn't Python 3 ready? :-( >>>>>>> >>>>>>> How can I catch MQTT data into the weewx database from an external >>>>>>> broker ilocated n my home lan? >>>>>>> >>>>>>> Is this the right extension to use: >>>>>>> >>>>>>> https://github.com/bellrichm/WeeWX-MQTTSubscribe >>>>>>> ....? >>>>>>> >>>>>>> What I don't understand: if I will use it as a sevice, in which >>>>>>> database will it put my values? >>>>>>> Is there a mapping needed!? Can I use a seperate database? >>>>>>> Is there a configuration example available or does anybody set up >>>>>>> such a station and could provide the config or give me some advice >>>>>>> howto get the data form the MQTT broker into weewx and the database >>>>>>> to show the values and graphs!? >>>>>>> That would be great! >>>>>>> >>>>>>> Thanks in advance! >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> Christian >>>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/799ee743-eaef-4475-ad33-cc494c9c52a0n%40googlegroups.com.